Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

DHCPV4

  • 1 DHCPv4
    • 1.1 DHCPv4 Overview
    • 1.2 Dynamic ARP Inspection Overview
      • 1.2.1 ARP Poisoning
      • 1.2.2 How Dynamic ARP Inspection Works
        • 1.2.2.1 ARP and DHCP Snoop Entries
      • 1.2.3 Configuration Notes and Feature Limitations for DAI
      • 1.2.4 Configuring Dynamic ARP Inspection
      • 1.2.5 Configuring Dynamic ARP Inspection on Multiple VLANs
      • 1.2.6 Disabling Syslog Messages for DAI
      • 1.2.7 Displaying ARP Information
      • 1.2.8 Configuring DAI to Support Multi-VRF
      • 1.2.9 Enabling Trust on a Port for a Specific VRF
    • 1.3 DHCP Snooping
      • 1.3.1 How DHCP Snooping Works
        • 1.3.1.1 DHCP Snooping Deployment over a LAG
        • 1.3.1.2 DHCP Binding Database
        • 1.3.1.3 Client IP-to-MAC address mappings
      • 1.3.2 System Reboot and the Binding Database
      • 1.3.3 Configuration Notes and Feature Limitations for DHCP Snooping
      • 1.3.4 Configuring DHCP Snooping
      • 1.3.5 Configuring DHCP Snooping on Multiple VLANs
      • 1.3.6 Displaying DHCPv4 Snooping Information
      • 1.3.7 Configuring DHCPv4 Snooping for Multi-VRF
      • 1.3.8 Enabling DHCP Snooping MAC Address Verification
    • 1.4 DHCP Relay Agent Information and Option 82 Insertion
      • 1.4.1 Configuration Notes for DHCP Option 82
      • 1.4.2 DHCP Option 82 Sub-options
        • 1.4.2.1 Sub-option 1: Circuit ID
        • 1.4.2.2 Sub-option 2: Remote ID
        • 1.4.2.3 Sub-option 6: Subscriber ID
      • 1.4.3 DHCP Option 82 Configuration
        • 1.4.3.1 Disabling or Re-enabling DHCP Option 82 Processing on an Interface
        • 1.4.3.2 Disabling DHCP Option 82 Globally and Re-enabling it for an Interface
        • 1.4.3.3 Disabling or Re-Enabling DHCP Option 82 (dhcp-relay information) Processing on an Interface
        • 1.4.3.4 Disabling or Re-enabling DHCP Option 82 Processing on all VLAN Member Ports
        • 1.4.3.5 Disabling or Re-enabling DHCP Option 82 (dhcp-relay information) Processing on all VLAN Member Ports
        • 1.4.3.6 Changing the DHCP Relay Agent Forwarding Policy
        • 1.4.3.7 Configuring DHCP Snooping Relay Information Sub-options
        • 1.4.3.8 Displaying DHCP Option 82 Information
        • 1.4.3.9 Displaying DHCP Option 82 (dhcp-relay information) Information
        • 1.4.3.10 Configuring the Source IP Address of a DHCP Client Packet on the DHCP Relay Agent
    • 1.5 IP Source Guard
      • 1.5.1 Configuration Notes and Feature Limitations for IP Source Guard
      • 1.5.2 Enabling IP Source Guard on a Port or Range of Ports
      • 1.5.4 Defining Static IP Source Bindings
      • 1.5.5 Enabling IP Source Guard for a VLAN
      • 1.5.6 Enabling IP Source Guard for a LAG Port for a VLAN
      • 1.5.7 Enabling IP Source Guard on Multiple VLANs
      • 1.5.8 Binding IP Source Guard ACLs to Ports
      • 1.5.11 Displaying Learned IP Addresses

DHCPv4

In this section:

  1. DHCPv4 Overview
    The Dynamic Host Configuration Protocol for IPv4 (DHCPv4) enables DHCP servers to pass configuration parameters such as IPv4 addresses to IPv4 hosts.
  2. Dynamic ARP Inspection Overview
  3. DHCP Snooping
  4. DHCP Relay Agent Information and Option 82 Insertion
  5. IP Source Guard

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback