`qos egress-shape-ifg-bytes`

Configures egress shaper IFG bytes.

Syntax

qos egress-shape-ifg-bytesvalue-in-bytes

no qos egress-shape-ifg-bytesvalue-in-bytes

Command Default

By default, a value of 20 bytes is configured.

Parameters

value-in-bytes: Specifies the number of preamble and IFG bytes to be added to egress shaping in the range 1 through 127.

Modes

Global configuration mode

Usage Guidelines

This command is supported on RUCKUS ICX 7150, ICX 7250, and ICX 7450,, ICX 7650 devices.

For the ICX 7650, we recommend using a value greater than or equal to 20 bytes.

The no form of the command restores the default value of 20.

Examples

The following example configures an egress shaper IFG bytes value of 25.

Device(config)# qos egress-shaper-ifg-bytes 25

The following example restores the default egress shaper IFG bytes value of 20.

Device(config)# no qos egress-shaper-ifg-bytes 25

qos egress-shape-ifg-bytes