extend vlan-range (VXLAN)

Extends a range of mapped VLANs over a VXLAN overlay gateway.
Syntax
extend vlan-range add vlan-id to vlan-id
no extend vlan-range add vlan-id to vlan-id
Command Default

VLANs are not extended over an overlay gateway.

Parameters
add
Adds the VLAN range.
vlan-id
Specifies the first VLAN you intend to extend over the VXLAN. Valid values range from 1 through 4095.
to vlan-id
Specifies the range of VLANs you intend to extend over the VXLAN.
Modes

Overlay-gateway site configuration mode

Usage Guidelines

The maximum number of VLANs in a range is 256.

This command is supported for router images only. This command is supported for RUCKUS ICX 7550, ICX 7650, and ICX 7850 devices only.

The no form of the command disables the range of mapped VLANs over a VXLAN overlay gateway.

Examples

The following example extends a range of mapped VLANs (VLAN 200 through VLAN 300) over a VXLAN overlay gateway.

device# configure terminal
device(config)# overlay-gateway gate1
device(config-overlay-gw-gate1)# type layer2-extension
device(config-overlay-gw-gate1)# site site s1
device(config-overlay-gw-gate1-site-s1)# extend vlan-range add 200 to 300
History
Release version Command history
09.0.10d This command was introduced.
Parent topic: Commands D through H