Search Results: "icx 7850"

displayed. The interface is designated by device number in stack/slot on the device/interface on the slot. brief Specifies brief output for all MACsec interfaces. User EXEC mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. It is recommended that you use the clear macsec

devices is outlined in the following table. Recommended Number of Entries for RUCKUS ICX Devices Devices Recommended Maximum Number of IPSG Entries Per Device RUCKUS ICX 7150 128 RUCKUS ICX 7550 2043 RUCKUS ICX 7650 4096 RUCKUS ICX 7850 1526 RUCKUS ICX 8100 1024 RUCKUS ICX 8200 1024 The recommended

interfaces. If BFD is disabled on an interface using the ip ospf bfd disable command, and BFD is configured globally for OSPFv2, the BFD session will not come up on all the specified OSPFv2-enabled interface where it has been disabled. This command is supported for RUCKUS ICX 7750 and ICX 7850 devices

commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. It is recommended that you use the clear macsec command to clear previous results for the show macsec statistics command before re-executing it. The show macsec statistics command displays the following information: Output field

SNMP notifications. X X system-max ip6-cache Configures the maximum number of IPv6 cache entries for ICX 7850 devices. X system-max ip6-neighbor Configures the maximum number of IPv6 neighbors for ICX 7850 devices. X telnet Enables a Telnet connection from the RUCKUS device to a remote IPv6 host

supported only on ICX 7250, ICX 7450, and ICX 7750 devices. The ICX 7150, ICX 7650, ICX 7850, and ICX 7550 devices do not support PFC. Flow control enables feedback from a receiver to its sender to communicate buffer availability. The RUCKUS implementation of IEEE 802.1Qbb PFC supports eight

multicast MAC address. vlan vlan-id Specifies a VLAN. User EXEC mode IGMP snooping is MAC-based for ICX 7150-C08 device, for all other devices it is IP-based. The show ip multicast mac-mcache command is available only for ICX 7150-C08 model. This command is not supported for RUCKUS ICX 7850 and ICX

This command is supported for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command disables the configured operational redundancy mode for the ES. The following example configures an ES to operate in all-active mode so that all links within the ES are operational. device# configure

multicast MAC address. vlan vlan-id Specifies a VLAN. User EXEC mode IGMP snooping is MAC-based for ICX 7150-C08 device, for all other devices it is IP-based. The show ip multicast mac-mcache command is available only for ICX 7150-C08 model. This command is not supported for RUCKUS ICX 7850 and ICX

mode is enabled, the default Ethernet MTU size is 9216. The maximum Ethernet MTU size is 10178. For ICX 7850 devices, the maximum jumbo frame size supported is 9380. When jumbo mode is enabled, the maximum ethernet MTU size is 9358 bytes. The IPv6 MTU functionality is applicable to VEs and physical IP