Search Results: "icx 7450"

-level Specifies the per-PG buffer threshold to trigger sending of priority flow control (PFC). Global configuration mode This command is supported only on Ruckus ICX 7250, ICX 7750, and ICX 7450, devices. This command is not supported on Ruckus ICX 7150 or ICX 7650 devices. You can attach an ingress

remove a scheduler-profile you must ensure that it is not attached to any port. On ICX 7450 and ICX 7750 devices, changing the global scheduler and port scheduler on running traffic may cause traffic loss. The default QoS-profile weights for each queue using a weighted QoS mechanism are as follows

Topologies handled by zero-touch or SPX interactive-setup Topologies handled by zero-touch or SPX interactive-setup Topologies handled by zero-touch or SPX interactive-setup ICX 7150 devices, ICX 7250 devices, ICX 7450 devices, or any combination can be discovered and automatically incorporated

default VRF of the interface is considered. The next hop in a route map will take effect only if the interface on which the route map is applied and the next hop in the route map are in the same VRF The no-ttl-decrement option is supported only on ICX 7750 and ICX 7450 devices. The no form of the

be disabled. In non-FIPS mode, you can disable this feature if necessary. IPsec is supported only on ICX 7450 devices. How It Works The IKEv2 control protocol discovers any NAT devices between IKE peers by sending new payloads called NAT Discovery (NAT-D) within IKE_SA_INIT messages. Each side sends

)# router ospf Router1(config-router-ospf-vrf-default-vrf)# area 0 Router1(config-router-ospf-vrf-default-vrf)# end Router2 Router2 may be any device that supports IPsec. The following example shows how to configure Router2 when the device is a Ruckus ICX 7450. Router2# configure terminal Router2(config

)# router ospf Router1(config-router-ospf-vrf-default-vrf)# area 0 Router1(config-router-ospf-vrf-default-vrf)# end Router2 Router2 may be any device that supports IPsec. The following example shows how to configure Router2 when the device is a Ruckus ICX 7450. Router2# configure terminal Router2(config

)# router ospf Router1(config-router-ospf-vrf-default-vrf)# area 0 Router1(config-router-ospf-vrf-default-vrf)# end Router2 Router2 may be any device that supports IPsec. The following example shows how to configure Router2 when the device is a Ruckus ICX 7450. Router2# configure terminal Router2(config

Matching precedence of the entry Counters Statistics for matching packets Instructions Action set or pipeline processing Cookie Opaque data sent by the OpenFlow Controller RUCKUS ICX devices support the OpenFlow match fields in the following tables. OpenFlow match fields for ICX 7450 Match field ICX

)# router ospf Router1(config-router-ospf-vrf-default-vrf)# area 0 Router1(config-router-ospf-vrf-default-vrf)# end Router2 Router2 may be any device that supports IPsec. The following example shows how to configure Router2 when the device is a Ruckus ICX 7450. Router2# configure terminal Router2(config