Search Results: "icx 7650"

displayed. The interface is designated by device number in stack/slot on the device/interface on the slot. brief Specifies brief output for all MACsec interfaces. User EXEC mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. It is recommended that you use the clear macsec

devices is outlined in the following table. Recommended Number of Entries for RUCKUS ICX Devices Devices Recommended Maximum Number of IPSG Entries Per Device RUCKUS ICX 7150 128 RUCKUS ICX 7550 2043 RUCKUS ICX 7650 4096 RUCKUS ICX 7850 1526 RUCKUS ICX 8100 1024 RUCKUS ICX 8200 1024 The recommended

: active, S: standby, M: member U1: N->A->S->M->S, U2: M->S->A->S->M, U4: M->S->A Current stack management MAC is cc4e.2438.7500 The following two examples show information for an ICX 7650 stack that includes rear-module operating mode. ICX7650-48ZP# show stack T=5d19h28m49.5

: active, S: standby, M: member U1: N->A->S->M->S, U2: M->S->A->S->M, U4: M->S->A Current stack management MAC is cc4e.2438.7500 The following two examples show information for an ICX 7650 stack that includes rear-module operating mode. ICX7650-48ZP# show stack T=5d19h28m49.5

: active, S: standby, M: member U1: N->A->S->M->S, U2: M->S->A->S->M, U4: M->S->A Current stack management MAC is cc4e.2438.7500 The following two examples show information for an ICX 7650 stack that includes rear-module operating mode. ICX7650-48ZP# show stack T=5d19h28m49.5

commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. It is recommended that you use the clear macsec command to clear previous results for the show macsec statistics command before re-executing it. The show macsec statistics command displays the following information: Output field

supported only on ICX 7250, ICX 7450, and ICX 7750 devices. The ICX 7150, ICX 7650, ICX 7850, and ICX 7550 devices do not support PFC. Flow control enables feedback from a receiver to its sender to communicate buffer availability. The RUCKUS implementation of IEEE 802.1Qbb PFC supports eight

7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7750 512 1024 ICX 7850 512 1024 ICX 8100 512 2048 ICX 8200 512 2048 The no form of the command resets the number of allowable entries in the static ARP table to the default value. The following example increases the maximum

31-Bit Subnet Masks on Point-to-Point Networks 31-Bit Subnet Masks on Point-to-Point Networks 31-Bit Subnet Masks on Point-to-Point Networks 31-bit subnet masks are supported on ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, and ICX 7850 devices running the full Layer 3 image. To conserve IPv4

Layer 2 loop detection protocols. Suppressing the link status notification allows a quick port status change and recovery to occur without triggering any of the changes that are necessary when a port stays down. By default, the delay time is not configured. Configuring delayed Layer 3 notifications on the VE feature is supported on ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, and ICX 7850 product families from RUCKUS.