Configuration Fundamentals
| Feature | ICX 7150 | ICX 7150-ES | ICX 7550 | ICX 7650 | ICX 7850 | ICX 8100 | ICX 8200 |
|---|---|---|---|---|---|---|---|
| Terminal logging | 08.0.70 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Reset button to factory default settings | 08.0.70 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| 10G LRM adapter | 08.0.61 | 10.0.10d | 10.0.001 | No | No | No | 10.0.00 |
| System name, contact, and location | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Cancelling an outbound Telnet session | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Byte-based broadcast, multicast, and unknown-unicast limits | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Packet-based broadcast, multicast, and unknown-unicast limits | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| CLI banners | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Port name | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| 10 Mbps port speed | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | No | 10.0.10f | 10.0.00 |
| 100 Mbps port speed | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | No | 10.0.10f | 10.0.00 |
| 1000 Mbps port speed | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| 2.5 Gbps port speed | 08.0.612 | No | 08.0.953 | 08.0.704 | 10.0.10e5 | No | 10.0.106 |
| 5 Gbps port speed | 08.0.917 | No | 08.0.953 | 08.0.704 | 10.0.10e5 | No | 10.0.108 |
| 10 Gbps port speed | 08.0.917 | No | 08.0.953 | 08.0.704 | 10.0.10e5 | 10.0.10g_cd19 | 10.0.108 |
| 25 Gbps port speed | No | No | No | No | 08.0.9010 | No | 10.0.0011 |
| 40 Gbps port speed | No | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | No | No |
| 100 Gbps port speed | No | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | No | No |
| Auto-negotiation | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Auto-negotiation maximum port speed advertisement | 08.0.6012 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Full-duplex mode | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Auto MDI/MDIX detection | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Port status (enable or disable) | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Support for 100BaseFX | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | No | No | 10.0.1013 |
| Gbps fiber negotiate mode | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| VoIP auto-configuration and CDP | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Broadcast, multicast, and unknown-unicast suppression port dampening | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Port flap dampening | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Shutdown prevention for loop-detect | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Elapsed timestamp for port statistics reset | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Traffic counters for outbound traffic | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Egress queue counters | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Flash and boot code verification | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Flash image verification | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Changing flash timeout value | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Software reboot | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Show boot preference | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Loading and saving configuration files | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| System reload scheduling | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Management port | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | No | 10.0.00 |
| Telnet | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| TFTP | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| TFTP blocksize | 08.0.60 | 10.0.10d | 09.0.10a | 09.0.10a | 09.0.10a | 10.0.10f | 10.0.00 |
| Static MAC address | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Multi-port static MAC address | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Static MAC entries with option to set traffic priority | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | No | No |
| Multi-port static MAC address with option to set traffic priority | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | No | No |
| MAC address learning | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| MAC address filtering on source and destination MAC addresses | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| MAC address move notification | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Ability to disable MAC learning | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Layer 2 jumbo frames | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Ethernet loopback | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| CLI history | 08.0.60 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | 10.0.10f | 10.0.00 |
| Fanless mode | 08.0.6014 | 10.0.10d | No | No | No | 10.0.10f15 | 10.0.1016 |
| Status button support | 08.0.70 | 10.0.10d | 08.0.95 | 08.0.70 | 08.0.90 | No | 10.0.00 |
| LEDs On/Off command | 08.0.92 | 10.0.10d | 08.0.95 | 08.0.92 | 08.0.92 | 10.0.10f | 10.0.00 |
| IEEE 802.3bz | No | 10.0.10d | 08.0.95 | 08.0.70 17 | 10.0.10f185 | No | 10.0.1019 |
| Default username and password
Note: Applicable to new
ICX switches that are initially deployed using the 08.0.90
release.
|
08.0.70 | 10.0.10d | 08.0.95 | 08.0.90 | 08.0.90 | 10.0.10f | 10.0.00 |
| Forwarding profiles | No | 10.0.10d | 08.0.95 | No | 08.0.90 | 10.0.10f | 10.0.00 |
|
RUCKUS SmartZone management of ICX devices (monitoring, customized thresholds, remote ping, traceroute)
|
08.0.80 | No | 08.0.95 | 08.0.80a | 08.0.90 | 10.0.10f | 10.0.00 |
|
RUCKUS SmartZone management of ICX devices (ICX configuration from SmartZone) |
08.0.90 | No | 08.0.95 | 08.0.90 | 08.0.90 | 10.0.10f | 10.0.00 |
| FQDN Support for Switch Registrar | 08.0.92 | 10.0.10d | 08.0.95 | 08.0.92 | 08.0.92 | 10.0.10f | 10.0.00 |
| ICX Source IP for SmartZone Communication | 08.0.92 | 10.0.10d | 08.0.95 | 08.0.92 | 08.0.92 | 10.0.10f | 10.0.00 |
| ICX Management in RUCKUS One | 09.0.10e20 | No | 09.0.10e20 | 09.0.10e20 | 09.0.10e20 | 10.0.10f | 10.0.10 |
| IPv6 Support for SmartZone (static configuration only) | 09.0.10a | 10.0.10d | 09.0.10a | 09.0.10a | 09.0.10a | 10.0.10f | 10.0.00 |
| RESTCONF | 09.0.10a | 10.0.10d | 09.0.10a | 09.0.10a | 09.0.10a | 10.0.10f | 10.0.00 |
| New web user interface (UI) | 09.0.10a | 10.0.10d | 09.0.10a | 09.0.10a | 09.0.10a | 10.0.10f | 10.0.00 |
| AV Profile web user interface management | No | No | No | No | No | 10.0.10h_cd121 | 10.0.10h_cd122 |
| RUCKUS AV Interface | No | No | No | No | No | 10.0.10h052321 | 10.0.10h052422 |
| Breakout support | No | No | 09.0.10a | No | 08.0.90 | No | No |
| Port Profile | No | No | 10.0.10 | 10.0.10 | 10.0.10 | 10.0.10f | 10.0.10 |
| Enhance ICX Client Visibility | No | No | 10.0.10c | 10.0.10c | 10.0.10c | 10.0.10f | 10.0.10c |
- Supported on base module (Module 1) only. ↩
- Supported only on ICX 7150-48ZP. ↩
- Supported only on ICX 7550-24ZP, ICX 7550-48ZP. ↩
- Supported only on ICX 7650-48ZP. ↩
- Only supported on ICX 7850-48C. ↩
- Supported only on ICX 8200-24ZP, ICX 8200-48ZP2, ICX 8200-C08ZP. ↩
- Supported only on ICX 7150-C10ZP. ↩
- Supported only on ICX 8200-C08ZP. ↩
- Supported only on ICX8100-C08PF-X, ICX8100-24-X, ICX 8100-24P-X, ICX 8100-48-X, ICX 8100-48P-X. ↩
- Supported only on ICX 7850-48F. ↩
- Not supported on ICX 8200-C08PF. ↩
- Only for copper ports. Fiber ports are not supported. ↩
- Supported on ICX 8200-24F and 8200-48F only. ↩
- Supported on the ICX 7150-24P and the ICX 7150-48P only. ↩
- Supported on ICX 8100-24P, ICX 8100-48P only. ↩
- Supported on ICX 8200-24, ICX 8200-24P, ICX 8200-48, ICX 8200-48P, and ICX 8200-48PF only. ↩
- Supported on the ICX 7650-48ZP only. ↩
- Supported on the ICX 7850-48C only. ↩
- Supported on ICX 8200-24ZP, 8200-48ZP2, and 8200-C08ZP only. ↩
- As an exception FastIron release 10.0.00 and subsequent patches do not support this feature. However, FastIron release 10.0.10 and later will support this feature. ↩
- Supported only on the ICX8100-C08PF-V, ICX8100-24P-V, and ICX8100-48P-V ↩
- Supported only on the ICX8200-24PV, ICX8200-C08PFV, ICX8200-C08ZP-V, ICX8200-24ZP-V, ICX8200-48ZP2-V, ICX8200-48P-V, ICX8200-48PF-V, and ICX8200-48PF2-V . ↩
- Supported only on the ICX8100-C08PF-V, ICX8100-24P-V, and ICX8100-48P-V ↩
- Supported only on the ICX8200-24PV, ICX8200-C08PFV, ICX8200-C08ZP-V, ICX8200-24ZP-V, ICX8200-48ZP2-V, ICX8200-48P-V, ICX8200-48PF-V, and ICX8200-48PF2-V . ↩