-
Campus Fabric licensing
Last Updated
Sep 03, 2026
license installed. MACsec licenses for ICX 7650 CB units MACsec is supported on ICX 7650 CB units if a valid feature license is installed. License inheritance If a premium license is enabled on a device in the CB, all ICX 7450, ICX 7250, or ICX 7150 devices attached to the CB and operating as PE units
-
Configuring Ethernet loopback in VLAN-aware mode
Last Updated
Sep 03, 2026
and destination MAC address are looped back. Skip this step to configure flow-unaware mode. On ICX 7750, ICX 7450, and ICX 7250 devices, configuring the ethernet loopback test-mac command is mandatory because these devices support only flow-aware mode. In other supported platforms, the ethernet
-
Ethernet loopback operational modes
Last Updated
Sep 03, 2026
disruptive because control traffic is also looped back and affects other services operating on this port. However, this mode is effective when the traffic source device is directly connected to the port . Ethernet loopback can be configured in the following combinations: VLAN-unaware VLAN-unaware and flow-aware VLAN-aware VLAN-aware and flow-aware The flow-unaware configuration is not supported on the ICX 7750, ICX 7450, and ICX 7250 devices.
-
Flexible Authentication (802.1x Authentication and MAC Authentication)
Last Updated
Sep 03, 2026
Flexible Authentication (802.1x Authentication and MAC Authentication) Flexible Authentication (802.1x Authentication and MAC Authentication) Flexible Authentication (802.1x Authentication and MAC Authentication) Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 802.1x Authentication
-
IEEE Compliance
Last Updated
Sep 03, 2026
IEEE Compliance IEEE Compliance IEEE Compliance The following table lists the IEEE standards that are supported on the RUCKUS ICX platforms. Footnotes indicate exceptions. IEEE Number IEEE Standard Description ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 IEEE 802.1AB Station and Media
-
Last Updated
Sep 02, 2026
RUCKUS ICX Switches
Product Guides
Configure and Deploy, Administer and Manage
Configure and Deploy
Administer and Manage
Deployment Scenario 5: Preventing an ICX 7250 or ICX 7450 from Being Discovered by Zero-Touch Deployment Scenario 5: Preventing an ICX 7250 or ICX 7450 from Being Discovered by Zero-Touch Deployment Scenario 6: Changing PE IDs Using SPX Interactive-Setup Deployment Scenario 6: Changing PE IDs Using SPX
-
license delete unit
Last Updated
Sep 03, 2026
specify both the unit number and the index number to delete a license from a specific unit. Privileged EXEC mode Use the license delete perpetual command to delete an SAU license. ICX 7150-ES and ICX 8100 devices do not support license commands. On the ICX 7450 and ICX 7250 devices, if more than one
-
Modifying and Displaying Layer 3 System Parameter Limits
Last Updated
Sep 03, 2026
automatically adjusted by the system and cannot be manually modified. To display the Layer 3 system parameter defaults, maximum values, and current values, enter the show default value command at any level of the CLI. The following example shows output on an ICX 7450 with third-generation modules. device
-
stack unconfigure
Last Updated
Sep 03, 2026
ICX7250-24 standby 00e0.5201.0100 0 remote Ready Release Command History 07.4.00 This command was introduced. 08.0.00a The mixed-stack option was added. The rollback option was deprecated. 08.0.40 Removed the mixed-stack option as this is not supported on ICX 7750 ICX 7450 and ICX 7250 devices.
-
snmp-server enable traps
Last Updated
Sep 03, 2026
form of the command disables the traps. The ipsec and ikev2 options are only supported on the RUCKUS ICX 7450, with an FPGA-based add-on crypto card. The following example enables SNMP traps on the device for MAC notification globally. device(config)# snmp-server enable traps mac-notification Release