-
Overview of Static Routing
Last Updated
Sep 03, 2026
attached destination networks Virtual interface Null interface ICX 7150 and devices do not provide tunnel gateway next-hop options. You can influence the preference a route is given in the following ways: Setting a route metric higher than the default metric Giving the route an administrative distance
-
VRRP-Ev2 overview
Last Updated
Sep 03, 2026
highest priority assumes the master role. VRRP-E is not supported on non- Ruckus devices and does not interoperate with VRRP sessions on Ruckus devices. Only 16 VRRP instances are configurable on the ICX 7150 device.
-
IP RIP general group
Last Updated
Sep 03, 2026
equivalent to the number of hops between the Layer 3 Switch and the destination network. A Layer 3 Switch can receive multiple paths to a destination. A RIP route can have a maximum cost of 15. ICX 7150-ES and ICX 8100 devices do not support RIP. Name, OID, and syntax Access Description snRtIpRipEnable
-
NTP over Management VRF Limitations
Last Updated
Sep 03, 2026
ICX 7150 and ICX 8200 devices. The communication channel between the NTP client and the server is through the In-Band data port only. An Out-Of-Band (OOB) management port is not supported. One external NTP server must exist to synchronize an NTP client with an NTP server. If you configure NTP in a VRF
-
ISSU Limitations and Considerations
Last Updated
Sep 03, 2026
ISSU Limitations and Considerations ISSU Limitations and Considerations ISSU Limitations and Considerations When using ISSU, consider the following capabilities and restrictions: ISSU is supported on FastIron ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, and ICX 7850 stackable hardware. ISSU is
-
tunnel path-mtu-discovery
Last Updated
Sep 03, 2026
Disables PMTUD. Tunnel interface configuration mode ICX 7150 and ICX 8100 devices do not support tunnels. The no form of the command disables PMTUD and resets the aging to the default value of 10 minutes. The following example changes the reset time (default age timer) to a value of 25. device
-
web-management
Last Updated
Sep 03, 2026
terminal device(config)# web-management https Release version Command history 08.0.92 This command was modified for ICX 7150-C08PT devices to restrict command options to HTTP and HTTPS only. 09.0.00 This command was modified to remove the following keywords: enable { vlan vlan-id | ethernet unit/slot/port } allow-no-password frame front-panel list-menu page-menu refresh hp-top-tools
-
Enabling the Flooding of Unregistered IPv4 Multicast Frames in an IGMP-Snooping-Enabled VLAN
Last Updated
Sep 03, 2026
stacking) RUCKUS ICX 7150 (standalone and stacking) Use the configure terminal command to enter global configuration mode. device# configure terminal Use the ip multicast flood-unregistered command to enable the flooding of unregistered IPv4 multicast frames. device# ip multicast flood-unregistered
-
router vrrp-extended
Last Updated
Sep 03, 2026
enabling VRRP-E, nearly all subsequent VRRP-E configuration is performed at the interface level. VRRP-E must be enabled globally before configuring VRRP-E instances. The no router vrrp-extended command globally disables VRRP-E. Only 16 VRRP instances are configurable on the ICX 7150 device. The
-
Last Updated
Sep 03, 2026
Campus Fabric Campus Fabric cannot be implemented on certain topologies. Topologies handled by zero-touch or SPX interactive-setup Topologies handled by zero-touch or SPX interactive-setup ICX 7150 devices, ICX 7250 devices, ICX 7450 devices, or any combination can be discovered and automatically incorporated into an existing Campus Fabric (SPX) domain when they are present in a valid topology.