-
Specifying IPv6 SNMP Parameters
Last Updated
Sep 03, 2026
IPv6 host address. device# configure terminal device(config)# snmp-server host ipv6 2001:DB8:89::13 mypublic port 200 device(config)# write memory device(config)# management source-interface ethernet 1/2/1 protocol snmp device(config)# snmp-server enable traps holddown-time 40 The following RUCKUS ICX devices support IPv6 for SNMPv3: ICX 7150, ICX 7550, ICX 7650, ICX 7850, and ICX 8200.
-
RUCKUS FastIron Layer 3 Routing Configuration Guide, 10.0.10
Last Updated
Sep 03, 2026
device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7850 512 1024 ICX 8100 512 2048 ICX 8200 512 2048
-
Static ARP
Last Updated
Sep 03, 2026
device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7850 512 1024
-
Specifying IPv6 SNMP Parameters
Last Updated
Sep 03, 2026
IPv6 host address. device# configure terminal device(config)# snmp-server host ipv6 2001:DB8:89::13 mypublic port 200 device(config)# write memory device(config)# management source-interface ethernet 1/2/1 protocol snmp device(config)# snmp-server enable traps holddown-time 40 The following RUCKUS ICX devices support IPv6 for SNMPv3: ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, and ICX 7850.
-
Zero Touch Provisioning using Group level Configuration
Last Updated
Sep 03, 2026
define common configuration that is applicable to all the switch models in the group and another option to select configuration based on switch family, for example ICX 7150, ICX 7250, and so on. When a new switch without any existing configuration running FastIron version 8.0.90a or later version
-
Stacking Deployment Introduction
Last Updated
Sep 03, 2026
trapped to the CPU. As a result, failure to enable STP in a stack may have significant impact on traffic in a production environment. STP is enabled by default in switch images. Starting from FastIron release 09.0.00, STP is also enabled by default in router images. ICX 7150 and ICX 7250 devices must pre
-
Port Mirroring and Monitoring Configuration
Last Updated
Sep 03, 2026
supported Port Type ICX (7150, 7450, 7250, 7650, 7850 and 7550) Ingress mirror ports 1 per port region Egress mirror ports 1 per port region Ingress monitored ports No limit Egress monitored ports No limit Region refers to the number of devices (BCM chipset) in a unit. You can configure more than
-
Overview of Static Routing
Last Updated
Sep 03, 2026
attached destination networks Virtual interface Null interface ICX 7150 devices do not support tunnels. You can influence the preference a route is given in the following ways: Setting a route metric higher than the default metric Giving the route an administrative distance Static routes can be
-
tunnel path-mtu-discovery
Last Updated
Sep 03, 2026
Disables aging for PMTUD. Tunnel interface configuration mode ICX 7150 devices do not support tunnels. The no form of the command disables PMTUD and resets the aging to the default value of 10 minutes. The following example changes the reset time (default age timer) to a value of 25. device(config
-
tunnel protection ipsec profile
Last Updated
Sep 03, 2026
7450 devices. ICX 7150 devices do not support tunnels. The no form of the command removes the IPsec profile configuration. The following example shows how to configure an IPsec profile named prof_blue on a VTI with the tunnel ID 1 for an IPsec IPv4 tunnel. device# configure terminal device (config