-
ipv6 multicast mcache-age
Last Updated
Sep 03, 2026
configured time. You may notice a delay of 0 to 60 seconds over the configured value. On devices that support MAC-based MLD snooping (such as ICX 7450 and ICX 7250) devices, more than one mcache can be mapped to the same destination MAC. When an mcache entry is deleted, the MAC entry may not be deleted
-
priority-flow-control enable
Last Updated
Sep 03, 2026
configuration mode This command is supported only on Ruckus ICX 7250, ICX 7450, and ICX 7850 devices. To enable global PFC, symmetrical flow control (SFC) must be disabled. You must enable PFC globally before you configure it for priority groups. In global configuration mode, configuring the
-
Configuring Replay Protection
Last Updated
Sep 03, 2026
received in exact incremental sequence. out-of-order window size: Frames are accepted out of order within the designated window size. The maximum window size is 4294967295. disable: Frames are not validated. The disable option is a duplicate option available on ICX 7450 devices. The no macsec replay
-
Last Updated
Sep 03, 2026
Ruckus ICX 7450. Creating VLANs as links on a tagged port for security Creating VLANs as links on a tagged port for security Configuring a VRF Instance Configuring a VRF Instance Starting a routing process for a VRF Starting a routing process for a VRF You must enable a routing protocol for each VRF
-
Last Updated
Sep 03, 2026
, and IP Source Guard to support Multi-VRF. Configuring Multi-VRF Configuring Multi-VRF Configuring VRF system-max values Configuring VRF system-max values Use this example procedure to modify the default system-max values to accommodate Multi-VRF on a Ruckus ICX 7450. Creating VLANs as links on a
-
Force mode configuration syntax
Last Updated
Sep 03, 2026
)# interface ethernet 1/1/8 device(config-if-e1000-1/1/8)# speed-duplex 10-full On ICX 7450 and ICX 7250-24G, the command options 10-half and 100-half are not supported on 1G fiber ports with mini-GBIC (SFPs) for copper. Force Mode Configuration Considerations The following considerations apply to the
-
Deleting SAU and XML Licenses from an ICX Device
Last Updated
Sep 03, 2026
following command at the privileged EXEC level of the CLI. device# license delete unit 3 all In this example, all the licenses for unit 3 are deleted. Use the show license unit command to display the index numbers. On the ICX 7450 and ICX 7250 devices, if more than one non-node locked license file is
-
31-Bit Subnet Masks on Point-to-Point Networks
Last Updated
Sep 03, 2026
31-Bit Subnet Masks on Point-to-Point Networks 31-Bit Subnet Masks on Point-to-Point Networks 31-Bit Subnet Masks on Point-to-Point Networks 31-bit subnet masks are supported on ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, and ICX 7850 devices running the full Layer 3 image. To conserve IPv4
-
Configuring Delay Time for Notifying VE Down Event
Last Updated
Sep 03, 2026
Layer 2 loop detection protocols. Suppressing the link status notification allows a quick port status change and recovery to occur without triggering any of the changes that are necessary when a port stays down. By default, the delay time is not configured. Configuring delayed Layer 3 notifications on the VE feature is supported on ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, and ICX 7850 product families from RUCKUS.
-
Last Updated
Sep 03, 2026
, and IP Source Guard to support Multi-VRF. Configuring Multi-VRF Configuring Multi-VRF Configuring VRF system-max values Configuring VRF system-max values Use this example procedure to modify the default system-max values to accommodate Multi-VRF on a Ruckus ICX 7450. Creating VLANs as links on a