-
Zero Touch Provisioning using Group level Configuration
Last Updated
Sep 03, 2026
define common configuration that is applicable to all the switch models in the group and another option to select configuration based on switch family, for example ICX 7150, ICX 7250, and so on. When a new switch without any existing configuration running FastIron version 8.0.90a or later version
-
qos egress-shape-ifg-bytes
Last Updated
Sep 03, 2026
and IFG bytes to be added to egress shaping in the range 1 through 127. Global configuration mode This command is supported on Ruckus ICX 7150, ICX 7250, ICX 7450,, ICX 7650, and ICX 7750 devices. This command is supported on ICX 7650, and ICX 8100 devices only. It is recommend to use a value
-
tunnel tos
Last Updated
Sep 03, 2026
. ICX 7150 devices do not support tunnels. The no form of the command removes the ToS configuration on the VTI. The following example shows how to configure a ToS value of 3 for an IPsec tunnel identified as 1. device(config)# interface tunnel 1 device(config-tnif-1)# tunnel mode ipsec ipv4 device(config-tnif-1)# tunnel tos 3 Release version Command history 08.0.41 This command was introduced.
-
Static ARP
Last Updated
Sep 03, 2026
device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7850 512 1024
-
Overview of Static Routing
Last Updated
Sep 03, 2026
attached destination networks Virtual interface Null interface ICX 7150 devices do not support tunnels. You can influence the preference a route is given in the following ways: Setting a route metric higher than the default metric Giving the route an administrative distance Static routes can be
-
RUCKUS FastIron Layer 3 Routing Configuration Guide, 10.0.10
Last Updated
Sep 03, 2026
device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7850 512 1024 ICX 8100 512 2048 ICX 8200 512 2048
-
tunnel tos
Last Updated
Sep 03, 2026
. ICX 7150 devices do not support tunnels. The no form of the command removes the ToS configuration on the VTI. The following example shows how to configure a ToS value of 3 for an IPsec tunnel identified as 1. device(config)# interface tunnel 1 device(config-tnif-1)# tunnel mode ipsec ipv4 device(config-tnif-1)# tunnel tos 3 Release version Command history 08.0.41 This command was introduced.
-
tunnel path-mtu-discovery
Last Updated
Sep 03, 2026
Disables aging for PMTUD. Tunnel interface configuration mode ICX 7150 devices do not support tunnels. The no form of the command disables PMTUD and resets the aging to the default value of 10 minutes. The following example changes the reset time (default age timer) to a value of 25. device(config
-
tunnel protection ipsec profile
Last Updated
Sep 03, 2026
7450 devices. ICX 7150 devices do not support tunnels. The no form of the command removes the IPsec profile configuration. The following example shows how to configure an IPsec profile named prof_blue on a VTI with the tunnel ID 1 for an IPsec IPv4 tunnel. device# configure terminal device (config
-
VRRP and VRRP-Extended MIBs
Last Updated
Sep 03, 2026
Redundancy Protocol (VSRP). ICX 7150-ES and ICX 8100 devices do not support VRRP and VRRP-E. Name, OID, and syntax Access Description snVrrpIfStateChangeTrap 1.3.6.1.4.1.1991.1.2.12.1.2 Syntax: Integer Read-write Indicates if the SNMP agent process has been enabled to generate VRRP interface state