Search Results: "icx 7150"

packets transmitted over the tunnel. ipv6 Specifies the application of IPsec protection for IPv6 packets transmitted over the tunnel. Tunnel interface configuration mode IPsec is supported only on ICX 7450 devices. ICX 7150 devices do not support tunnels. The no form of the command removes the IPsec

Groups Mcache Maximum Maximum RUCKUS ICX 7150 3072 1024 RUCKUS ICX 7550 2048 (all Profiles) 2048 (all Profiles) RUCKUS ICX 7650 8000 8000 RUCKUS ICX 7850 2048 (Profile 1, Profile 2 and Profile 4) 6144 (Profile 3) 2048 (Profile 1, Profile 2 and Profile 4) 6144 (Profile 3) RUCKUS ICX 8100 512 (all

IPv4 address of an interface. ipv6-address Specifies the IPv6 address of the destination. Interface tunnel configuration mode ICX 7150 devices do not support tunnels. You must ensure that a route to the tunnel destination exists on the tunnel source device and create a static route if necessary. The

packets transmitted over the tunnel. ipv6 Specifies the application of IPsec protection for IPv6 packets transmitted over the tunnel. Tunnel interface configuration mode IPsec is supported only on ICX 7450 devices. ICX 7150 devices do not support tunnels. The no form of the command removes the IPsec

Setting the Power Class for a PoE Power-Consuming Device Setting the Inline Power Priority for a PoE Port Resetting PoE Parameters Inline Power on PoE LAG Ports Inline power on Power over Ethernet (PoE) LAG ports is enabled by default. Fanless Mode Support on the ICX 7150 Fanless mode enables the device

enable DAI on individual VLANs and assign any interface as the ARP inspection trust interface. If an interface is a tagged port in this VLAN, you can turn on the trust port per VRF, so that traffic intended for other VRF VLANs will not be trusted. ICX 7150 devices do not support VRFs. Complete the

configuring an IPv6 address or explicitly enabling IPv6 on that interface. ICX 7150 devices do not support tunnels. To configure a basic IPv6 static route through a next-hop tunnel, perform these steps. Enter global configuration mode. device# configure terminal Enter the IPv6 destination address and

Configuration Min Default Max ip-route 4096 12000 12000 ip6-route 68 730 2048 The following table lists values for ip-route and ip6-route on the RUCKUS ICX 7150. Values vary depending on the IPv6 prefix length. Configuration Limits for ip-route and ip6-route on RUCKUS ICX 7150 Devices Configuration

.......: 70.0 deg-C Shutdown level......: 85.0 deg-C Boot Prom MAC : cc4e.248b.b050 Management MAC: cc4e.248b.b050 The following is sample output from the show chassis command executed on ICX 7150-24P, ICX 7150-48P, or ICX 7150-48PF devices. device# show chassis The stack unit 1 chassis info: Power supply 1

ip6-route on ICX 7250 Devices Configuration Min Default Max ip-route 4096 12000 12000 ip6-route 68 730 2048 The following table lists values for ip-route and ip6-route on the RUCKUS ICX 7150. Values vary depending on the IPv6 prefix length. Configuration Limits for ip-route and ip6-route on RUCKUS