-
sequence (permit | deny in Extended IPv4 ACLs)
Last Updated
Sep 03, 2026
specifying 0.0.0.255 in the wildcard mask format. If you specify icmp and also specify the any-icmp-type option, the following QoS options are not available: dscp-marking, dscp-matching, internal-priority-marking, 802.1p-priority-marking, ond 802.1p-priority-matching. On RUCKUS ICX 7150 and ICX 7750 devices
-
sequence (permit | deny in Extended IPv4 ACLs)
Last Updated
Sep 03, 2026
specifying 0.0.0.255 in the wildcard mask format. If you specify icmp and also specify the any-icmp-type option, the following QoS options are not available: dscp-marking, dscp-matching, internal-priority-marking, 802.1p-priority-marking, ond 802.1p-priority-matching. On RUCKUS ICX 7150 and ICX 7750 devices
-
Changing PE IDs with SPX interactive-setup
Last Updated
Sep 03, 2026
also enabled and must be disabled. Two CB SPX ports (1/1/3 and 1/1/16) are configured, and a range of ports are identified by the zero-touch-ports configuration to detect new PE candidates. Two PEs, 17 and 18, are attached to the CB (a standalone ICX 7750). If necessary, disable the zero-touch utility
-
sequence (permit | deny in Extended IPv4 ACLs)
Last Updated
Sep 03, 2026
specifying 0.0.0.255 in the wildcard mask format. If you specify icmp and also specify the any-icmp-type option, the following QoS options are not available: dscp-marking, dscp-matching, internal-priority-marking, 802.1p-priority-marking, ond 802.1p-priority-matching. On RUCKUS ICX 7150 and ICX 7750 devices
-
Changing PE IDs with SPX Interactive-setup
Last Updated
Sep 03, 2026
also enabled and must be disabled. Two CB SPX ports (1/1/3 and 1/1/16) are configured, and a range of ports are identified by the zero-touch-ports configuration to detect new PE candidates. Two PEs, 17 and 18, are attached to the CB (a standalone ICX 7750). If necessary, disable the zero-touch utility
-
Last Updated
Aug 20, 2026
RUCKUS ICX Switches
Product Guides
Install and Upgrade
necessary software components in a setup using one command. Refer to Software upgrade using a Unified Forwarding Image on page 36. Supported hardware This guide supports the following Ruckus products: • Ruckus ICX 7750 Series • Ruckus ICX 7650 Series • Ruckus ICX 7450 Series • Ruckus ICX 7250 Series
-
Last Updated
Aug 20, 2026
RUCKUS ICX Switches
Product Guides
Software License
........................................................................................................................ 13 ICX 7750 Certificate of Entitlement..................................................................................................................................................13 Software Licensing Tasks
-
show bfd neighbors
Last Updated
Sep 03, 2026
This command is supported for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The show bfd neighbors command displays the following information: Output Field Description NeighborAddress The IPv4 or IPv6 address of the remote peer. State The current state of
-
permit (Extended IPv4 ACLs and IPv6 ACLs)
Last Updated
Sep 03, 2026
-marking dscp-matching For RUCKUS ICX 7150 and ICX 7750 devices, ACL logging is not supported for egress ACLs. For RUCKUS ICX 7150 devices, ACL logging is not supported for egress ACLs. When specifying type of service (ToS), you can indicate multiple tos-value options by entering the sum of the needed
-
show bfd neighbors
Last Updated
Sep 03, 2026
This command is supported for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The show bfd neighbors command displays the following information: Output Field Description NeighborAddress The IPv4 or IPv6 address of the remote peer. State The current state of