-
Last Updated
Sep 02, 2026
-45) on the RUCKUS ICX 7550 non-port side panel provides an out-of-band network connection to the device. Getting In-Band Access Getting In-Band Access Verifying the Correct Operation Verifying the Correct Operation Backing Up the Running Configuration Backing Up the Running Configuration
-
ipv6 options drop
Last Updated
Sep 03, 2026
not configured. Global configuration mode For hop-by-hop headers, option types 00, 01, 04, 194, 195, and 201 are permitted. For destination headers, option types 00, 01, 04, and 201 are permitted. For all other options, traffic is dropped. Dropping IPv6 options is not supported on ICX 7550 and ICX
-
match ip address evpn-prefix-list
Last Updated
Sep 03, 2026
address evpn-prefix-list prefix-list-name The EVPN prefix name to be used for MAC address filtering for the route map is not configured. prefix-list-name Specifies a prefix list. Route-map configuration mode This command is supported for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the
-
ipv6 options drop
Last Updated
Sep 03, 2026
not configured. Global configuration mode For hop-by-hop headers, option types 00, 01, 04, 194, 195, and 201 are permitted. For destination headers, option types 00, 01, 04, and 201 are permitted. For all other options, traffic is dropped. Dropping IPv6 options is not supported on ICX 7550 and ICX
-
arp-suppression
Last Updated
Sep 03, 2026
snooping, any MAC-IP bindings learned via the BGP EVPN control plane are also stored in the same MAC-IP table. This command is supported for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command disables ARP suppression for the VNI with ID 100. The following example enables ARP
-
TCAM Space Configuration
Last Updated
Sep 03, 2026
space for IPv4 routing information, you must configure the TCAM space manually. For ICX 7550, ICX 7850, ICX 8100, and ICX 8200 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied
-
IPv6 ACL Configuration Notes
Last Updated
Sep 03, 2026
interfaces that have IPv6 ACLs applied on outbound packets, the following features are not supported: ACL mirroring RUCKUS ICX 7150, RUCKUS ICX 7550, RUCKUS ICX 7650, and RUCKUS ICX 7850 ACL logging Traffic policies Internal priority marking It is not possible to configure conflicting ACL filters
-
Upgrading from FastIron 08.0.70 or Earlier to 09.0.10a or Later
Last Updated
Sep 03, 2026
details regarding upgrade process, refer to RUCKUS FastIron Software Upgrade Guide. Beginning with FastIron release 10.0.00, a switch ("Layer 2") image will no longer be provided for ICX devices. Only the router ("Layer 3") image will be available. The switch image for the ICX 7550 and ICX 7650 is
-
ISSU Limitations and Considerations
Last Updated
Sep 03, 2026
ISSU Limitations and Considerations ISSU Limitations and Considerations ISSU Limitations and Considerations When using ISSU, consider the following capabilities and restrictions: ISSU is supported on FastIron ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, and ICX 7850 stackable hardware. ISSU is
-
Upgrading from FastIron 08.0.70 or Earlier to 09.0.10a or Later
Last Updated
Sep 03, 2026
details regarding upgrade process, refer to RUCKUS FastIron Software Upgrade Guide. Beginning with FastIron release 10.0.00, a switch ("Layer 2") image will no longer be provided for ICX devices. Only the router ("Layer 3") image will be available. The switch image for the ICX 7550 and ICX 7650 is