Search Results: "icx 8200"

09.0.10a - ICX 8200 10.0.00 - ICX 8200-24ZP, -48ZP2, -24FX, -24F, -48F, -C08ZP 10.0.10 - The following table defines ICX and SmartZone release compatibility. ICX switches must be running FastIron 08.0.80a at a minimum to connect to SmartZone. An ICX switch running unsupported firmware can still connect

symmetrical-flow-control enable command is recommended as this turns on SFC for priorities from 0 through 4 and does not impact other high priority queues. Enabling SFC on all priorities is not recommended as it can cause network instability. The all-priorities keyword is not supported for ICX 8200 devices

legitimate UDP connections. The security measures for DDoS Gratuitous ARP Attacks and UDP Flooding are supported on ICX 8200 devices only. Gratuitous ARP and UDP rate limiting safeguards can be configured and implemented, along with ingress and egress user-defined ACLs, to provide effective security

Configures the client device remote-id to be added. The remote-id may be up to 63 characters in length. Interface configuration mode. This command is supported for ICX 8200 devices only. The no form of the command will disable the DHCPv6 relay information functionality on the specified VLAN or

mode The qinq-tunnel cvlan command allows the addition or replacement of a CVLAN in a packet. This aids in segregating traffic from different clients or tenants, ensuring efficient use of available VLAN IDs, and simplifying network configuration The new-cvlan cvlan-id option is available for ICX 8200 devices

DHCP - Dynamic Host Configuration Protocol DHCP - Dynamic Host Configuration Protocol DHCP - Dynamic Host Configuration Protocol Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 BootP/DHCP relay 08.0.60 10.0.10d 08.0.95 08.0.70 08.0.90 No 10.0.00 Specifying which IP address

ACLs - Access Control Lists ACLs - Access Control Lists ACLs - Access Control Lists Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 IPv4/IPv6 ACLs 08.0.60 10.0.10d 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 IPv6 access list (management ACLs) 08.0.60 10.0.10d 08.0.95 08.0.70

DHCP - Dynamic Host Configuration Protocol DHCP - Dynamic Host Configuration Protocol DHCP - Dynamic Host Configuration Protocol Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 BootP/DHCP relay 08.0.95 08.0.70 08.0.90 No 10.0.00 Specifying which IP address will be included in a DHCP/BootP

, ICX 7150-C10ZP, ICX 7550, ICX 7650, ICX 7850, ICX 8100, and ICX 8200 devices. Refer to the RUCKUS FastIron Features and Standards Support Matrix for more information about the supported devices. The following figure provides a summary of the standards within the ITU-T SG15/Q13 (Telecommunication

mode. For ICX 7150 devices, ICX 7150-24 (Non PoE) and ICX7150-12P support PTP packet prioritization and end to end transparent clock mode. PTP packet prioritization and end to end transparent clock mode is supported on all ICX models of ICX 7550, ICX 7650, ICX 7850, ICX 8100, ICX 8200, ICX7150-24