Search Results: "icx 7750"

Clears all the actions in the action set write-metadata Writes the metadata field from the mask Brocade devices may support the actions listed in the following table. OpenFlow actions supported on Brocade devices OpenFlow action ICX 6610 ICX 6450 (Mixed stack) ICX 7750 ICX 7450 Process the packet

Version Supported ICX 7150, ICX 7250, ICX 7450, ICX 7650, ICX 7750, ICX 7850, ICX 8200 FastIron 10.0.00 and subsequent release versions in the 10.0.xx code stream

-Gbps SPX PE links to 10-Gbps links. 1-Gbps connections between CB units and PE units are supported beginning from FastIron release 08.0.80. Valid ICX 7750 CB-to-PE Port Combinations CB port PE port 40-Gbps QSFP (1x40Q module) 10-Gbps Fiber (4x10F module) 10-Gbps Copper (4x10T module) 1-Gbps Fiber

ICX 7750 devices, ACL logging is not supported for egress ACLs. For the log keyword to trigger a log entry, logging must be enabled with the logging enable command. To delete a rule from an ACL, do either of the following: Enter no sequence seq-value. Type no followed by the full command syntax

used. To use one of the other gateways, modify the configuration so that the gateway you want to use has the lowest metric. If more than one gateway has the lowest metric, the gateway that appears first in the running-config is used. On ICX 7750, ICX 7450, and ICX 7250 devices, pings to the data port

, ICX 7550, ICX 7650, ICX 7750, and ICX 7850 devices. It is recommended that these ports be configured "route-only" to prevent the leaking of switching traffic if two interfaces in the same VLAN are configured with different VRFs. Virtual interfaces Loopback interfaces Ethernet interfaces Tunnel

7150 and ICX 7750 devices, ACL logging is not supported for egress ACLs. On RUCKUS ICX 7150 devices, ACL logging is not supported for egress ACLs. For the log keyword to trigger a log entry, logging must be enabled with the logging enable command. To delete a rule from an ACL, do either of the

command overrides global settings configured using the bfd command in OSPFv3 router configuration mode. It is recommended to use the default values. This command is supported for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The no form of the command

command overrides global settings configured using the bfd command in OSPFv3 router configuration mode. It is recommended to use the default values. This command is supported for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The no form of the command

7150 and ICX 7750 devices, ACL logging is not supported for egress ACLs. For the log keyword to trigger a log entry, logging must be enabled with the logging enable command. To delete a rule from an ACL, do either of the following: Enter no sequence seq-value. Type no followed by the full command