-
macsec replay-protection
Last Updated
Sep 03, 2026
supported on ICX 7450, ICX 7550, ICX 7650, and ICX 7850 devices. MACsec commands are supported only on ICX 7550, ICX 7650, and ICX 7850 devices. By default, "macsec replay-protection strict" is enabled under any mka-cfg-group; however, the default configuration is not visible in show running-config or
-
Prerequisites
Last Updated
Sep 03, 2026
) which are compatible with the 6.1.1 controller. For switch usage in network segmentation: One or more of the following switches as the distribution switch: RUCKUS ICX 7550, RUCKUS ICX 7650, or RUCKUS ICX 7850. (VxLAN is supported only on these models.) One or more of the following switches as access
-
type layer2-extension evpn
Last Updated
Sep 03, 2026
This command is supported for RUCKUS ICX 7850 and ICX 7550 devices only. When this command is configured, the local site information is advertised via EVPN and remote sites, instead of being manually configured. The no form of the command removes the configured VXLAN gateway type. The following
-
vni
Last Updated
Sep 03, 2026
Specifies that the VNI type is Layer 2. EVPN EVI configuration mode This command is supported for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command removes the configured VNI. The following example configures a VNI for a Layer 2 EVPN instance. device# configure terminal device
-
Configuration Notes and Feature Limitations for IPv6 RA Guard
Last Updated
Sep 03, 2026
the egress direction. On ICX 7450 and ICX 7550 devices running a switch image, CPU utilization is high (approximately 99%) while RA guard traffic is sent at a rate of 1,000 packets per second or higher.
-
About This Document
Last Updated
Sep 03, 2026
the feature. For example, OpenFlow is only supported on ICX 7150, ICX 7650, ICX 7850, and ICX 8200. So the table does not have columns for ICX 7150-ES, ICX 7550, or ICX 8100. The values in this guide list the verified scalability limits for ICX switches. The limits provided in this guide focus on
-
Supported Hardware
Last Updated
Sep 03, 2026
Switches are not supported. RUCKUS ICX 7550 Switches RUCKUS ICX 7150 Switches RUCKUS ICX 7150-C08P and ICX 7150-C08PT switches are not supported. RUCKUS ICX 7150-C08P and ICX 7150-C08PT switches are not supported. From 10.0.10j, RUCKUS ICX 7150 Switches are not supported. From 10.0.10j, RUCKUS ICX
-
NTP - Network Time Protocol
Last Updated
Sep 03, 2026
NTP - Network Time Protocol NTP - Network Time Protocol NTP - Network Time Protocol Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Network Time Protocol Version 4 (NTP) 08.0.60 10.0.10d 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 System clock 08.0.60 10.0.10d 08.0.95 08.0.70
-
Software Upgrade
Last Updated
Sep 03, 2026
Software Upgrade Software Upgrade Software Upgrade Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 System backup to USB 8.0.70 No No 8.0.95 No 8.0.70 8.0.90 Boot from USB 8.0.70 8.0.90 8.0.90 8.0.95 8.0.70 8.0.90 8.0.90 Software upgrade via CLI 8.0.60 8.0.30 8.0.20 8.0.95
-
VXLAN - Virtual Extensible LAN
Last Updated
Sep 03, 2026
VXLAN - Virtual Extensible LAN VXLAN - Virtual Extensible LAN VXLAN - Virtual Extensible LAN Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 VXLAN support 09.0.10a No 08.0.95 No 10.0.20b_cd1 MACsec over VXLAN 09.0.10a No 09.0.10a No No VXLAN with Routing in and out of tunnels (RIOT) 09.0.10d