Search Results: "icx 7550"

Valid Number of Ports in a Group Static LACP ICX 7850 ICX 7750 ICX 7650 ICX 7550 ICX 7450 ICX 7250 256 256 1 to 16 The RUCKUS ICX device can scale up to a maximum of 2048 LAG ports only. ICX 7150 128 128 1 to 8 The RUCKUS ICX 7150 can scale up to 1024 LAG ports and is also limited to the number of ports on the device.

Default Route Lookup Control Non-Tunneled Tunneled IPv4 IPv6 IPv4 IPv6 ICX 7850, ICX 7750, ICX 7650, ICX 7550, ICX 7450, ICX 7250 Strict mode (Interface configuration) Yes Yes Yes Yes No No Loose mode (Interface configuration) NA Yes Yes Yes No No In strict mode (interface configuration), if the number

supported on ICX 7450, ICX 7550, ICX 7650, and ICX 7850 devices. MACsec commands are supported only on ICX 7550, ICX 7650, and ICX 7850 devices. By default, "macsec replay-protection strict" is enabled under any mka-cfg-group; however, the default configuration is not visible in show running-config or

, 10.0.10b, 10.0.10c, 10.0.10d, 10.0.10e, 10.0.20, or 10.0.20a). RUCKUS ICX 7550-24XZP switch is supported in FastIron release 10.0.20b-cd1 or later versions; it is not supported in FastIron 09.0.10 and 10.0.10 releases. If an ICX 7000 series switch is not running the minimum required version, you can

breakout. Prerequisites: Before enabling breakout on a RUCKUS ICX 7550 switch, use the switch CLI Session function in the GUI to configure the slot 2 uplink by entering the appropriate command ( slot 2 uplink-40g or slot 2 uplink-100g), followed by the write memory and the reload commands to apply the

breakout. Prerequisites: Before enabling breakout on a RUCKUS ICX 7550 switch, use the switch CLI Session function in the GUI to configure the slot 2 uplink by entering the appropriate command ( slot 2 uplink-40g or slot 2 uplink-100g), followed by the write memory and the reload commands to apply the

supported on ICX 7450, ICX 7550, ICX 7650, and ICX 7850 devices. MACsec commands are supported only on ICX 7550, ICX 7650, and ICX 7850 devices. By default, "macsec replay-protection strict" is enabled under any mka-cfg-group; however, the default configuration is not visible in show running-config or

configured globally. Enable each port individually if you want to enable or disable timestamping on an individual port or range of ports. In stacking mode, PTP must be configured globally for the ICX 7150, ICX 7550, ICX 7650, and ICX 7850 devices. In stacking mode, PTP must be configured globally

synchronization in a packet-based network like an Ethernet network, and to correct the latency and time delays. Unlike Network Time Protocol (NTP), the PTP clock devices will stamp the precise time that the synchronization messages spend in each device. PTP is supported on RUCKUS ICX 7550, ICX 7650, ICX

configured globally. Enable each port individually if you want to enable or disable timestamping on an individual port or range of ports. In stacking mode, PTP must be configured globally for the ICX 7150, ICX 7550, ICX 7650, and ICX 7850 devices. In stacking mode, PTP must be configured globally