Search Results: "icx 7450"

and IFG bytes to be added to egress shaping in the range 1 through 127. Global configuration mode This command is supported on Ruckus ICX 7150, ICX 7250, ICX 7450,, ICX 7650, and ICX 7750 devices. This command is supported on ICX 7150, ICX 7650, and ICX 8100 devices only. It is recommend to use a

and IFG bytes to be added to egress shaping in the range 1 through 127. Global configuration mode This command is supported on Ruckus ICX 7150, ICX 7250, ICX 7450,, ICX 7650, and ICX 7750 devices. For the ICX 7650, we recommend using a value greater than or equal to 20 bytes. The no form of the

configured for the VTI. ipsec-profile-name Specifies the name of the IPsec profile to secure packets that go out on this interface. Interface configuration mode Before executing this command, the tunnel mode must be set to ipsec by using the tunnel mode ipsec command. IPsec is supported only on ICX

all Hardware entry optimization is disabled by default on ICX 7750 devices and enabled by default on ICX 7450 and ICX 7250 devices. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form of the command

EXEC level. To remove a license file, use the license delete command. The unit unit_id parameter is used only on ICX 7450 devices when copying a license file to a specific unit id. If you attempt to download the same license twice on the device, the following error message is displayed on the console

all IPMC entry optimization is disabled by default on and ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form of the command

IPv6 host address. device# configure terminal device(config)# snmp-server host ipv6 2001:DB8:89::13 mypublic port 200 device(config)# write memory device(config)# snmp-client ipv6 2001:DB8:89::23 device(config)# snmp-server trap-source ethernet 1/2/1 device(config)# snmp-server enable traps holddown-time 40 The following RUCKUS ICX devices support IPv6 for SNMPv3: ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750, and ICX 7850

Enabling priority flow control for a single priority group Enabling priority flow control for a single priority group Enabling priority flow control for a single priority group Follow these steps to enable PFC for a single priority group (PG). PFC is supported only on RUCKUS ICX 7250, ICX 7450, and

device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7750 512 1024 ICX 7850 512 1024

Configuring Multi-VRF Configuring Multi-VRF Configuring Multi-VRF Multi-VRF Configuring VRF system-max values Use this example procedure to modify the default system-max values to accommodate Multi-VRF on a Ruckus ICX 7450. Creating VLANs as links on a tagged port for security Configuring a VRF