Configuring Multi-VRF

In this section:

  1. Configuring VRF system-max values
    Use this example procedure to modify the default system-max values to accommodate Multi-VRF on a RUCKUS ICX 7450.
  2. Creating VLANs as links on a tagged port for security
  3. Configuring a VRF Instance
  4. Starting a routing process for a VRF
    You must enable a routing protocol for each VRF instance. This example uses OSPF.
  5. Assigning a Layer 3 interface to a VRF
    The following example illustrates how a virtual Ethernet (VE) interface is assigned to a VRF, and how IP addresses and the OSPF protocol are configured.
  6. Assigning a Loopback Interface to a VRF
  7. Verifying a Multi-VRF Configuration
    The following examples illustrate the use of a variety of show commands that are useful in verifying Multi-VRF configurations.
  8. Removing a VRF configuration
  9. Configuring static ARP for Multi-VRF
    The interface associated with an ARP entry determines to which VRF the ARP entry belongs.
  10. Configuring Additional ARP Features for Multi-VRF
    This section discusses options for configuring proxy ARP and ARP rate limiting.
Parent topic: Multi-VRF