Search Results: "icx 7750"

-defined VRF depends on the platform. Platform Minimum Default Maximum ICX 7250 N/A N/A N/A ICX 7450 128 1024 15168 ICX 7650 64 4096 131072 ICX 7750 64 4096 131072 For ICX 7250, ICX 7450 and ICX 7650 devices, if the maximum number of routes are not configured, the default is considered the maximum

7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7750 512 1024 ICX 7850 512 1024 The no form of the command resets the number of allowable entries in the static ARP table to the default value. The following example increases the maximum number of static ARP table entries you

user-defined VRF depends on the platform. Platform Minimum Default Maximum ICX 7250 N/A N/A N/A ICX 7450 64 100 5120 ICX 7650 16 1024 7168 ICX 7750 16 1024 7168 For ICX 7250, ICX 7450 and ICX 7650 devices, if the maximum number of routes are not configured, the default is considered the maximum

debugging information about the BFD state. vrf vrf-id Displays debugging information about BFD for the specified VRF. Privileged EXEC mode This command is supported for Ruckus ICX 7750 and ICX 7850 devices. The following example displays debugging information about the BFD holdtime. device# debug bfd

replication ports. For ICX 7750, ICX 7650, and ICX 7850 devices, l2mc is replaced with ipmc in the output. ref_cnt Indicates the number of IP multicast mcache entries using this mac mcache entry. Mcast group The IPv4 multicast group address. Src Addr IPv4 multicast source address. OIF Outgoing

supported on the Ruckus ICX 7750. The maximum port speed advertisement works only when auto-negotiation is enabled (CLI command speed-duplex auto). If auto-negotiation is off, the device rejects the maximum port speed advertisement configuration. You can specify a list of ports, separated by a space, or

software images only. Enabling or disabling Layer 2 switching is not supported on virtual interfaces. Ruckus FCX 6430, FCX 6450, FCX 6430-C12, ICX 6450, and ICX 6610 devices support both the ingress and egress L2 traffic suppression on a route-only port. Ruckus ICX 7450, ICX 7250, ICX 7750, and ICX

extenders (PEs), or PE units, to a set of ICX 7650, ICX 7750, or ICX 7850 stack units configured as the control bridge (CB). The CB stack must contain units of the same model family but can contain different stackable SKUs for that model family. The CB provides a single point of management for the

31-Bit Subnet Masks on Point-to-Point Networks 31-Bit Subnet Masks on Point-to-Point Networks 31-Bit Subnet Masks on Point-to-Point Networks 31-bit subnet masks are supported on ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750, and ICX 7850 devices running the full Layer 3 image. To

extenders (PEs), or PE units, to a set of ICX 7650, ICX 7750, or ICX 7850 stack units configured as the control bridge (CB). The CB stack must contain units of the same model family but can contain different stackable SKUs for that model family. The CB provides a single point of management for the