Search Results: "icx 7450"

supported on the Ruckus ICX 7450, with an FPGA-based add-on crypto card. The following example configures syslog generation for IKEv2 events. device# configure terminal device(config)# logging enable ikev2 The following example configures logging of additional IKEv2 events. device# configure terminal

platform. Configuration Limits for ip-vrf with the system-max Command Hardware Minimum Default Maximum ICX 7250 4 16 16 ICX 7450 4 32 32 ICX 7550 4 32 32 ICX 7650 16 128 128 ICX 7850 16 128 128 Additional Configuration Limits for the system-max Command Configuration ICX 7450 ICX 7650 Min Default Max Min

platform. Configuration Limits for ip-vrf with the system-max Command Hardware Minimum Default Maximum ICX 7250 4 16 16 ICX 7450 4 32 32 ICX 7550 4 32 32 ICX 7650 16 128 128 ICX 7750 16 128 128 ICX 7850 16 128 128 Additional Configuration Limits for the system-max Command Configuration ICX 7450 ICX 7650

ICX 7450 models, including ICX 7450-32ZP devices, can be enabled as PE units. In a Campus Fabric domain, no local switching occurs on the PE ports. All data and control packet processing occurs in the CB. No IP addressing is possible on the physical PE ports; however, virtual interfaces (VEs) are

stacking or uplink on Module 2 ICX 7750 6 X 40-Gbps front and rear stacking and uplink ICX 7650 4 X 40-Gbps stacking or uplink, or 2 X 100-Gbps stacking or uplink on slot 3 ICX 7550 1 X 100-Gbps or 2 X 40-Gbps stacking or uplink on slot 2 ICX 7450 (rear) 1 X 40-Gbps stacking and uplink on slots 3 and 4

brcdIPSecModuleNotification brcdIp.1.1.15.1.0.14 The SNMP trap that is generated when IPsec module state is changed. This notification is supported only on the Ruckus ICX 7450 device. brcdIPSecSessionNotification brcdIp.1.1.15.1.0.12 The SNMP trap that is generated when IPsec session state is changed. This

brcdIPSecModuleNotification brcdIp.1.1.15.1.0.14 The SNMP trap that is generated when IPsec module state is changed. This notification is supported only on the Ruckus ICX 7450 device. brcdIPSecSessionNotification brcdIp.1.1.15.1.0.12 The SNMP trap that is generated when IPsec session state is changed. This

all IPMC entry optimization is disabled by default on and ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. IPMC entry optimization is enabled by default. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global

all Hardware entry optimization is disabled by default on ICX 7750 devices and enabled by default on ICX 7450 and ICX 7250 devices. Hardware entry optimization is enabled by default. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global

EXEC level. To remove a license file, use the license delete command. The unit unit_id parameter is used only on ICX 7450 devices when copying a license file to a specific unit id. If you attempt to download the same license twice on the device, the following error message is displayed on the console