Search Results: "icx 7450"

SNMP - Simple Network Management Protocol SNMP - Simple Network Management Protocol SNMP - Simple Network Management Protocol Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 SNMP v1, v2, and v3 8.0.60 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 Community strings 8.0.60 8.0.30

ARP - Address Resolution Protocol ARP - Address Resolution Protocol ARP - Address Resolution Protocol For considerations related to ARP in an 802.1BR (SPX) configuration, refer to the Ruckus FastIron Campus Fabric Configuration Guide Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX

Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 Virtual Router Redundancy Protocol (VRRP) 8.0.61 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 VRRP timer scaling 8.0.61 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 VRRP Extended (VRRP-E) 8.0.61 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90

SNMP - Simple Network Management Protocol SNMP - Simple Network Management Protocol SNMP - Simple Network Management Protocol Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 SNMP v1, v2, and v3 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90 Community strings 08.0.60 08.0.30 08.0.20

IPv4 Multicast VLAN Traffic Reduction IPv4 Multicast VLAN Traffic Reduction IPv4 Multicast VLAN Traffic Reduction Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 IGMP (v1, v2, and v3) 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90 IGMP v1/v2/v3 snooping (global and VLAN level

configured for the VTI. ipsec-profile-name Specifies the name of the IPsec profile to secure packets that go out on this interface. Interface configuration mode Before executing this command, the tunnel mode must be set to ipsec by using the tunnel mode ipsec command. IPsec is supported only on ICX

the default. The following example changes the value for the capacity of the MAC address table to 20000. device# configure terminal device(config)# system-max mac 20000 Release Command History 08.0.40 The command is not valid as you cannot change the number in ICX 7750, ICX 7450, and ICX 7250 devices.

Configures the number of VRF instances supported. Refer to the Usage Guidelines section. Global configuration mode The range of maximum and minimum configurable VRF instance and the default values depends on the platform. Platform Minimum Default Maximum ICX 7250 4 16 16 ICX 7450 4 16 16 ICX 7650

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is