Search Results: "icx 7750"

IPv6 Addressing IPv6 Addressing IPv6 Addressing For considerations related to IPv6 addressing in an 802.1BR (SPX) configuration, refer to the Ruckus FastIron Campus Fabric Configuration Guide Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 Global IPv6 address 8.0.60 8.0.30

throughout the guide. Unsupported hardware This release and future releases do not support ICX 7750 devices. References have been removed throughout the guide. Updates to address defects Minor updates on content throughout to address defects. All chapters. Minor editorial updates Minor editorial updates were made throughout the Configuration Guide. All chapters.

ICX 7650 and Brocade ICX 7750 devices. Name, OID, and syntax Access Description brcdSPXCBSPXLagTable brcdIp.1.1.3.40.2.4 Not-accessible The SPX configuration CB SPX LAG table. b rcdSPXCBSPXLagPrimaryPort brcdIp.1.1.3.40.2.4.1.1 Syntax: InterfaceIndexOrZero Not-accessible The LAG primary port for the

ICX 7650 and Brocade ICX 7750 devices. Name, OID, and syntax Access Description brcdSPXCBSPXLagTable brcdIp.1.1.3.40.2.4 Not-accessible The SPX configuration CB SPX LAG table. b rcdSPXCBSPXLagPrimaryPort brcdIp.1.1.3.40.2.4.1.1 Syntax: InterfaceIndexOrZero Not-accessible The LAG primary port for the

ICX 7650 and Brocade ICX 7750 devices. Name, OID, and syntax Access Description brcdSPXCBSPXLagTable brcdIp.1.1.3.40.2.4 Not-accessible The SPX configuration CB SPX LAG table. b rcdSPXCBSPXLagPrimaryPort brcdIp.1.1.3.40.2.4.1.1 Syntax: InterfaceIndexOrZero Not-accessible The LAG primary port for the

command is applicable only on Ruckus ICX 7150, ICX 7450, and ICX 7750,,,, devices. The command is applicable only on Ruckus ICX 7150 and ICX 7450, devices. Use the no form of the command to re-enable shutdown based on temperature threshold. The no form of the command disables the battleshort mode at

show breakout show breakout show breakout Displays information on 10 Gbps sub-ports broken out from 40 Gbps ports on certain FastIron devices. show breakout Privileged EXEC mode The show breakout command is available only on ICX 7750 devices. The show breakout command displays the following

configuration mode The system-max max-ecmp command is supported only on the Ruckus ICX 7750. If the maximum number of ECMP paths is not configured at the system level, by default, you can configure the maximum number of IP load sharing paths to a value from 2 through 8. The configuration of the maximum

configuration mode The system-max max-ecmp command is supported only on the Ruckus ICX 7750. If the maximum number of ECMP paths is not configured at the system level, by default, you can configure the maximum number of IP load sharing paths to a value from 2 through 8. The configuration of the maximum

source-MAC The port is flow-unaware. destination-MAC Specifies the flow parameter destination MAC address of the traffic. source-MAC Specifies the flow parameter source MAC address of the traffic. Interface configuration mode You must configure the ethernet loopback test-mac command on ICX 7750, ICX