Search Results: "icx 7750"

expires, no action is taken. This command is supported for RUCKUS ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The no form of the command removes the configured BFD holdover interval for the IP static route and reverts to the default value of 0 so that no

Specifies a stack unit. User EXEC mode This command is supported for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The following example shows agent-related information for all IPv4 sessions. device> show bfd agent sessions ipv4 all Flags: H:Hop [S:Single

interface. details Specifies detailed information. ip-address Specifies an IP address. ipv6-address Specifies an IPv6 address. ve vlan_id Specifies the VLAN number. ipv4 all Specifies all IPv4 sessions. ipv6 all Specifies all IPv6 sessions. User EXEC mode This command is supported for Ruckus ICX 7750 and

support 8192 IGMP snooping mcache entries. ICX 7650 switches support 8192 IGMP snooping mcache entries. ICX 7750 routers support 6K IGMP snooping mcache entries. The no form of the command restores the default maximum number of IGMP snooping mcache entries. The following example sets the maximum number of IGMP snooping mcache entries supported on the device to 2000. device# configure terminal device(config)# system-max igmp-snoop-mcache 2000

: Field Description MAC The multicast MAC address. Vlan The VLAN ID. l2mc The hardware entry which has the list of replication ports. For ICX 7750, ICX 7650, and ICX 7850 devices, l2mc is replaced with ipmc in the output. For ICX 7650, and ICX 7850 devices, l2mc is replaced with ipmc in the output

platforms for both Layer 2 and Layer 3 software images: RUCKUS ICX 7150 RUCKUS ICX 7250 RUCKUS ICX 7450 RUCKUS ICX 7550 RUCKUS ICX 7650 RUCKUS ICX 7750 RUCKUS ICX 7850 For the DHCPv6 server to be enabled, you must upgrade to FI 08.0.90 using the Unified FastIron Image (UFI). Refer to the Software Upgrade and Downgrade chapter in the RUCKUS FastIron Software Upgrade Guide for more information.

Specifies a stack unit. User EXEC mode This command is supported for Ruckus ICX 7750 and ICX 7850 devices. The following example shows agent-related information for all IPv4 sessions. device> show bfd agent sessions ipv4 all Flags: H:Hop [S:Single/M:Multi] P:Passive-Mode M:Micro-BFD MinTx/MinRx/Mult

Multicast Considerations Unless otherwise stated, Layer 2 and Layer 3 multicast features supported on a standalone ICX 7650, ICX 7750, or ICX 7850 are supported by the CB in a Campus Fabric domain, and the Layer 2 and Layer 3 scaling capacity are the same. An IP address cannot be configured on a PE

Enabling priority flow control on an interface Enabling priority flow control on an interface Enabling priority flow control on an interface Follow these steps to enable PFC on an interface. PFC is supported only on RUCKUS ICX 7250, ICX 7450, and ICX 7750 devices. The ICX 7150, ICX 7650, ICX 7850

and Brocade ICX 7750 devices. Name, OID, and syntax Access Description brcdSPXOperUnitTable brcdIp.1.1.3.40.2.2 Not-accessible The 802.1BR SPX operation unit table. brcdSPXOperUnitIndex brcdIp.1.1.3.40.2.2.1.1 Syntax: Integer32 Not-accessible The SPX unit ID. The CB unit ID is from 1 through 16 and