Search Results: "icx 8200"

IPv4 Multicast VLAN Traffic Reduction IPv4 Multicast VLAN Traffic Reduction IPv4 Multicast VLAN Traffic Reduction Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 IGMP (v1, v2, and v3) 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 IGMP v1/v2/v3 snooping (global and VLAN level) 08.0.95 08.0.70

stackable device. For ICX 8100 and ICX 8200 devices, the number will be between 0 and 0xfffe. For all other devices, the number will be between 0 and 0xffff. On individual ports, if tag-profile is enabled, it points to the global tag profile. Tag-profile can also be enabled for provisional ports.

the number of such packets or bytes that are flooded on the VLAN to other devices. The maximum number of interfaces on which BUM Rate Limit can be configured is 512. RUCKUS ICX devices support byte-based and packet-based rate limiting. For ICX 8100 and ICX 8200 devices, the packets-per-second rate limiting uses increments of 125.

Ports You can disable or re-enable DHCP option 37 processing globally, and disable and re-enable as necessary on specified VLANs. The dhcp6-relay information enable command is supported only on ICX 8200 devices. Enter global configuration mode. device# configure terminal Enter interface configuration

. Enabling the flooding of unregistered IPv4 multicast frames in an IGMP-snooping-enabled VLAN is supported on the following platforms: RUCKUS ICX 8100 (standalone) RUCKUS ICX 8200 (standalone and stacking) RUCKUS ICX 7850 (MCT, standalone, and stacking) RUCKUS ICX 7650 (MCT, standalone, and stacking

OSPFv3 - IPv6 Open Shortest Path First OSPFv3 - IPv6 Open Shortest Path First OSPFv3 - IPv6 Open Shortest Path First Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 OSPFv3 08.0.95 08.0.70 08.0.90 No 10.0.00 Route redistribution into OSPFv3 08.0.95 08.0.70 08.0.90 No 10.0.00 OSPFv3 route

stackable device. For ICX 8100 and ICX 8200 devices, the number will be between 0 and 0xfffe. For all other devices, the number will be between 0 and 0xffff. On individual ports, if tag-profile is enabled, it points to the global tag profile. Tag-profile can also be enabled for provisional ports.

16 128 128 ICX 7750 16 128 128 ICX 8200 4 16 16 The no form of the command resets the VRF instance to the default value. The following example configures the maximum number of VRF instance as 20. device(config)# system-max ip-vrf 20 device(config)# write memory device(config)# end

7.1.1 supports ICX 8100 10-Gbps uplink capabilities. This release also includes support for the ICX 8200-24PV and ICX 8200-C08PFV models. Refer to Supported ICX Models. Updates to address defects Minor updates on content throughout to address defects. All chapters Minor editorial updates Minor

1024 32 ICX 8200 1024 32 The system limit for authenticated MAC sessions also varies and depends on the ICX device and dynamic ACL assignments. Maximum Number of Authenticated MAC Sessions per System (Standalone or Stack) Supported platforms Maximum number of MAC sessions per system when none of the