Search Results: "icx 7750"

information for all egress buffer profiles configured in the system and a list of all ports attached to any egress buffer profile. Global configuration mode For Ruckus ICX 7150 devices, this command displays the port share level of the egress buffer profile. For Ruckus ICX 7250, ICX 7450, and ICX 7750 devices

expires, no action is taken. This command is supported for Ruckus ICX 7750 and ICX 7850 devices. The no form of the command removes the configured BFD holdover interval for the IP static route and reverts to the default value of 0 so that no holdover interval is configured. The following example sets

ip multicast mcache-age ip multicast mcache-age ip multicast mcache-age Configures the time for an mcache to age out when it does not receive traffic. ip multicast mcache-age num no ip multicast mcache-age The mcache ages out after the default age-out interval, which is 180 seconds for ICX 7750, ICX

interface. details Specifies detailed information. ip-address Specifies an IP address. ipv6-address Specifies an IPv6 address. ve vlan_id Specifies the VLAN number. ipv4 all Specifies all IPv4 sessions. ipv6 all Specifies all IPv6 sessions. User EXEC mode This command is supported for Ruckus ICX 7750 and

7250, or ICX 7150 devices are used as PE units, 1,728 ports are supported. Campus Fabric domain maximum configuration can be summarized as follows: 4 CB units (ICX 7650, ICX 7750, or ICX 7850 stack) 32 ports per CB (32 X 4 for full CB stack) Maximum of 8 PE chains Maximum 16 stand-alone PEs (in

default, the device monitors the local CPU port for control packet drops. However, you can configure the device to monitor a different port for packet drops. On the RUCKUS ICX 7250, ICX 7450, ICX 7750, ICX 7850, and ICX 7550 devices, each port has its own set of drop counters. This task is supported

, RUCKUS ICX 7650, RUCKUS ICX 7750, and RUCKUS ICX 7850 devices, ACL logging is not supported for ACLs applied to outbound traffic. In a rule that includes one or more of the following parameters, the log keyword is ignored: dscp-matching dscp-marking 802.1p-priority-matching 802.1p-priority-marking

frames received with the specific source MAC address and destination MAC address are looped back. Skip this step to configure flow-unaware mode. On ICX 7750, ICX 7450, and ICX 7250 devices, configuring the ethernet loopback test-mac command is mandatory because these devices support only flow-aware

header are used to identify a single PE port or a set of PE ports. For details on SPX configuration and terminology, refer to the RUCKUS FastIron Campus Fabric Configuration Guide. SNMP support RUCKUS ICX 7650 or ICX 7750 devices can be used as the Control Bridge (CB) for an SPX system. PE units

VRRP-E GRE PBR PIM-SM, PIM-SSM, PIM-DM PIM Passive BGP, BGP4+ (IPv6) VRF (IPv4 and IPv6) IPv6 over IPv4 Tunnels Static routing and RIP features are available on the Ruckus ICX 7650 without the Layer 3 Premium license. ICX 7750 Layer 3 Premium Features You are entitled to use the following features with