Search Results: "icx 7750"

ICX 7550 4000 64000 ICX 7650 8192 64000 ICX 7750 8192 64000 ICX 7850 8192 64000 ICX 8100 2048 8192 ICX 8200 2048 8192 The no form of the command resets the number of allowable static ARP table entries to the default value. The following example increases the maximum number of ARP table entries you

that can be configured depends on the platform. Platform Minimum Default Maximum ICX 7250 N/A N/A N/A ICX 7450 N/A N/A N/A ICX 7650 5120 5120 7168 ICX 7750 5120 5120 7168 The no form of the command resets the number of IPv6 routes to the default value. The following example configures the number of IPv4 routes as 5000. device# configure terminal device(config)# system-max ip6-route 5000 device(config)# write memory

interfaces with default session parameters. Use this command in BGP configuration mode to enable or disable BFD sessions for BFD peers on all interfaces for this BGP instance. This command is supported for RUCKUS ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The

, -24F, -10ZP 08.0.92 09.0.10a and subsequent patches ICX 7250 08.0.80a 09.0.10a and subsequent patches ICX 7450 08.0.80a 09.0.10a and subsequent patches ICX 7550 08.0.95a - ICX 7650 08.0.80a - ICX 7750 08.0.80a 08.0.95 and subsequent patches ICX 7850 08.0.90 - ICX 7850-48C 09.0.10a - ICX 8200 10.0.00

through 50. The default is 3. BGP configuration mode This command is supported for RUCKUS ICX 7750 and ICX 7850 devices. It is recommended to use the defualt values. The no form of the command restores the defaults. The following example sets the BFD session parameters globally for a BGP instance

interfaces with default session parameters. Use this command in BGP configuration mode to enable or disable BFD sessions for BFD peers on all interfaces for this BGP instance. This command is supported for RUCKUS ICX 7750 and ICX 7850 devices. The no form of the command disables BFD if it has been

ICX 7550 4000 64000 ICX 7650 8192 64000 ICX 7750 8192 64000 ICX 7850 8192 64000 The no form of the command resets the number of allowable static ARP table entries to the default value. The following example increases the maximum number of ARP table entries you can configure to 32000. device# configure terminal device(config)# system-max ip-arp 32000 device(config)# write memory device(config)# end device# reload

configured depends on the platform. Platform Minimum Default Maximum ICX 7250 N/A N/A N/A ICX 7450 N/A N/A N/A ICX 7650 5120 5120 7168 ICX 7750 5120 5120 7168 The no form of the command resets the number of IPv6 routes to the default value. The following example configures the number of IPv4 routes as 5000. device# configure terminal device(config)# system-max ip6-route 5000 device(config)# write memory

delegation default for ICX 7750 and ICX 7850 devices is 50. The following example sets the maximum number of prefixes that can be learned at the global level to 500. device# configure terminal device(config)# ipv6 dhcp-relay maximum-delegated-prefixes 500

sessions. ipv6 Specifies IPv6 sessions. all Specifies all sessions. session-id Specifies a session. stack-id Specifies a stack. statistics Specifies BFD session statistics. drops Specifies statistics for session drops. User EXEC mode This command is supported for Ruckus ICX 7750 and ICX 7850 devices