Search Results: "icx 8200"

interfaces or LAG ports, or both. For RUCKUS ICX 8200 and ICX 8100 devices, the command is supported in global configuration mode only. The no form of the command disables sFlow forwarding globally. The following example enables sFlow forwarding globally. device(config)# sflow enable

Port Mirroring Port Mirroring Port Mirroring Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Port mirroring and monitoring (mirroring of both inbound and outbound traffic on individual ports) 08.0.60 10.0.10d 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 ACL-based mirroring

User Accounts and Passwords User Accounts and Passwords User Accounts and Passwords Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Local user accounts 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 Local user passwords 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 Automatic re-enabling of locked-out

Software Upgrade Software Upgrade Software Upgrade Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 System backup to USB 08.0.95 No 08.0.90 No 10.0.00 Boot from USB 08.0.95 08.0.70 08.0.90 No 10.0.00 Software upgrade via CLI 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 Software upgrade via SNMP

Specifies unicast routing Privileged EXEC mode The no form of the command disables BGP debugging information from being displayed. RUCKUS ICX 8200, ICX 8100, and ICX 7150 devices do not support BGP. The following example enables BGP debugging information. device# debug ip bgp

interfaces or LAG ports, or both. For RUCKUS ICX 8200 and ICX 8100 devices, the command is supported in global configuration mode only. The no form of the command disables sFlow forwarding globally. The following example enables sFlow forwarding globally. device(config)# sflow enable

, PIM-DM PIM Passive BGP, BGP4+ (IPv6) VRF (IPv4 and IPv6) IPv6 over IPv4 Tunnels Static routing and RIP features are available on the RUCKUS ICX 7850 without the Layer 3 Premium license. ICX 8200 Layer 3 Premium Features The Layer 3 Premium license supports the following features on an ICX 8200. OSPFv2

or ICX 8200 device only, provided that they are not configured on the same port or VLAN. If IPSGv6 is enabled for a port, VLAN, or interface level, ACLs cannot be applied to inbound traffic on the port for the VLAN or interface using the ipv6 access-group command. When IPSGv6 is configured for a

ip icmp icmp-fragments ip icmp icmp-fragments ip icmp icmp-fragments Drops ICMP packet fragments. ip icmp icmp-fragments no ip icmp icmp-fragments By default, the ICMP packet fragments are not dropped. Global configuration mode This command is supported for RUCKUS ICX 8200 and ICX 8100 devices only

command is supported for RUCKUS ICX 8200 and ICX 8100 devices only. The show statistics dos-attack icmp fragments command displays the following information: The following example displays output of the show statistics dos-attack icmp fragments command. device# show statistics dos-attack icmp fragments