Search Results: "icx 7450"

dlb-internal-trunk-hash dlb-internal-trunk-hash dlb-internal-trunk-hash Changes the hashing method for inter-packet-processor (inter-pp) HiGig links that are used to connect master and slave units in ICX 7450-48 devices. dlb-internal-trunk-hash { inactivity-mode | spray-mode } no dlb-internal-trunk

where encryption begins. Valid values are: 30: Encryption begins at byte 31 of the data packet. 50: Encryption begins at byte 51 of the data packet. dot1x-mka-cfg-group mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. MACsec commands are supported only on ICX 7650

packets are accepted. strict Enables validation checks for frames with MACsec headers and configures strict validation mode. If frame validation fails, counters are incremented and packets are dropped. dot1x-mka-cfg-group mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices

key-server priority. The possible values range from 0 to 255, where 0 is highest priority and 255 is lowest priority. dot1x-mka-cfg-group mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. MACsec commands are supported only on ICX 7650 and ICX 7850 devices. The no

dlb-internal-trunk-hash dlb-internal-trunk-hash dlb-internal-trunk-hash Changes the hashing method for inter-packet-processor (inter-pp) HiGig links that are used to connect master and slave units in ICX 7450-48 devices. dlb-internal-trunk-hash { inactivity-mode | spray-mode } no dlb-internal-trunk

dlb-internal-trunk-hash dlb-internal-trunk-hash dlb-internal-trunk-hash Changes the hashing method for inter-packet-processor (inter-pp) HiGig links that are used to connect master and slave units in ICX 7450-48 devices. dlb-internal-trunk-hash { inactivity-mode | spray-mode } no dlb-internal-trunk

to a PE unit accidentally. Follow these steps to prevent an ICX 7150, ICX 7250, or ICX 7450 device from being discovered and converted by the zero-touch or interactive-setup utility. Use the no form of the command to again make the device available for zero-touch configuration or interactive-setup

to a PE unit accidentally. Follow these steps to prevent an ICX 7150, ICX 7250, or ICX 7450 device from being discovered and converted by the zero-touch or interactive-setup utility. Use the no form of the command to again make the device available for zero-touch configuration or interactive-setup

topology information packets are lost. Traditional stack technology reserves one QoS profile to provide a higher priority for stack topology and control traffic. On RUCKUS ICX 7450 stacking devices only, Priority 7 multicast traffic is not treated as Strict Priority. Multicast queues in the RUCKUS ICX

one QoS profile to provide a higher priority for stack topology and control traffic. On RUCKUS ICX 7450 stacking devices only, Priority 7 multicast traffic is not treated as Strict Priority. Multicast queues in the RUCKUS ICX 7450 are limited, so Priority 6 and Priority 7 Multicast traffic is mapped