Search Results: "icx 8100"

interfaces or LAG ports, or both. For RUCKUS ICX 8200 and ICX 8100 devices, the command is supported in global configuration mode only. The no form of the command disables sFlow forwarding globally. The following example enables sFlow forwarding globally. device(config)# sflow enable

Port Mirroring Port Mirroring Port Mirroring Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Port mirroring and monitoring (mirroring of both inbound and outbound traffic on individual ports) 08.0.60 10.0.10d 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 ACL-based mirroring

-sparse, or ip igmp proxy multicast routing commands are configured on a tunnel interface). Stacking trunk hashing for RUCKUS ICX devices is dynamic. Based on load, traffic is distributed across individual links in the trunk. Stacking is not supported on and ICX 8100 devices.

User Accounts and Passwords User Accounts and Passwords User Accounts and Passwords Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Local user accounts 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 Local user passwords 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 Automatic re-enabling of locked-out

Software Upgrade Software Upgrade Software Upgrade Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 System backup to USB 08.0.95 No 08.0.90 No 10.0.00 Boot from USB 08.0.95 08.0.70 08.0.90 No 10.0.00 Software upgrade via CLI 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 Software upgrade via SNMP

Specifies unicast routing Privileged EXEC mode The no form of the command disables BGP debugging information from being displayed. RUCKUS ICX 8200, ICX 8100, and ICX 7150 devices do not support BGP. The following example enables BGP debugging information. device# debug ip bgp

interfaces or LAG ports, or both. For RUCKUS ICX 8200 and ICX 8100 devices, the command is supported in global configuration mode only. The no form of the command disables sFlow forwarding globally. The following example enables sFlow forwarding globally. device(config)# sflow enable

Supported Hardware and Software Supported Hardware and Software Supported Hardware and Software The ICX 8100 supports FastIron software versions 10.0.10f and later. This document is applicable for all RUCKUS ICX 8100 Ethernet switch part numbers. The following tables list the device models and rack

by brief cable or PHY disturbances are reduced, improving overall stack stability without requiring any user configuration. Port Dampening (Stack Ports) Support for ICX 8100 models FastIron release 10.0.10h adds stacking support for ICX8100-C08PF-X, ICX8100-C16P-X, ICX8100-24-X, ICX8100-24P-X

interface Flags : MV-R - MVR Receiver, MV-S - MVR Source ---------+---------------+----+---+ Interface|Local |Mode|St | |Address | | | ---------+---------------+----+---+ v1 * MV-S Ena v2 * MV-S Ena v10 * MV-R Ena v11 * MV-R Ena Total Number of Interfaces : 4 Release version Command history 09.0.10a This command was introduced. 10.0.10h This command is supported for ICX 8100 devices.