Search Results: "icx 7450"

. number Specifies the number of IPv6 routes. Refer to the Usage Guidelines section. Global configuration mode The system-max ip6-route command cannot be configured for ICX 7250 and ICX 7450 devices, for which system maximum route values are derived from the ip-route value. For ICX 8200, ICX 8100, ICX

. Privileged EXEC mode VLAN configuration mode The show ip multicast optimization command is available only on ICX 7250, ICX 7750, and ICX 7450 devices. he show ip multicast optimization command is available only on ICX 7250 and ICX 7450 devices. Use this command to display the availability of IPMC

key-server priority. The possible values range from 0 to 255, where 0 is highest priority and 255 is lowest priority. dot1x-mka-cfg-group mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. The no form of the command removes the previous priority setting. During key

. number Specifies the number of IPv6 routes. Refer to the Usage Guidelines section. Global configuration mode The system-max ip6-route command cannot be configured for ICX 7250 and ICX 7450 devices, for which system maximum route values are derived from the ip-route value. For ICX 7850 and ICX 7550

the license is being transferred between two similar models (for example, from an ICX 7250 to another ICX 7250 or from an ICX 7450 to another ICX 7450). Syslog Messages and Trap Information

where encryption begins. Valid values are: 30: Encryption begins at byte 31 of the data packet. 50: Encryption begins at byte 51 of the data packet. dot1x-mka-cfg-group mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices. The no form of the command disables encryption

packets are accepted. strict Enables validation checks for frames with MACsec headers and configures strict validation mode. If frame validation fails, counters are incremented and packets are dropped. dot1x-mka-cfg-group mode MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices

. number Specifies the number of IPv6 routes. Refer to the Usage Guidelines section. Global configuration mode The system-max ip6-route command cannot be configured for ICX 7250 and ICX 7450 devices, for which system maximum route values are derived from the ip-route value. For ICX 8200, ICX 8100, ICX

system-max ip-route system-max ip-route system-max ip-route Increases the capacity of the IP route table. system-max ip-route number no system-max ip-route number The default is 12000 for ICX 7250 and ICX 7450 devices and 98304 for ICX 7750 and ICX 7650 devices. The default is 12000 for ICX 7650

. number Specifies the number of IPv6 routes. Refer to the Usage Guidelines section. Global configuration mode The system-max ip6-route command cannot be configured for ICX 7250 and ICX 7450 devices, for which system maximum route values are derived from the ip-route value. For ICX 7850 and ICX 7550