Search Results: "icx 7750"

authenticated MAC sessions per port on various platforms Supported platforms Maximum number of MAC sessions per port when none of the clients has dynamic ACL Maximum number of MAC sessions per port when at least one client has dynamic ACL ICX 7750 1024 32 ICX 7450 1024 32 ICX 7250 1024 32 The system

ICX 6610, ICX 7750, and ICX 7450 devices support enabling ports in either Layer 2, Layer 3, or Layer23 mode. OpenFlow is supported on Breakout ports on ICX 7750. OpenFlow match rules Match rule on Brocade device Port enabled for Layer 2 mode Yes Source port Yes Source or destination MAC address Yes

. The RUCKUS ICX 7750, ICX 7650, ICX 7450, and ICX 7250 devices support enabling ports in either Layer 2, Layer 3, or Layer23 mode. OpenFlow is supported on breakout ports on the RUCKUS ICX 7750. OpenFlow match rules Match rule RUCKUS ICX device Port enabled for Layer 2 mode Yes Source port Yes Source

authenticated MAC sessions per port on various platforms Supported platforms Maximum number of MAC sessions per port when none of the clients has dynamic ACL Maximum number of MAC sessions per port when at least one client has dynamic ACL ICX 7750 1024 32 ICX 7450 1024 32 ICX 7250 1024 32 The system

Port When None of the Clients Has Dynamic ACL Maximum Number of MAC Sessions per Port When at Least One Client Has Dynamic ACL ICX 7850 1024 32 ICX 7750 1024 32 ICX 7650 1024 32 ICX 7550 1024 32 ICX 7450 1024 32 ICX 7250 1024 32 ICX 7150 1024 32 The system limit for authenticated MAC sessions also

of load-sharing paths supported by the Layer 3 device. You can change the maximum number of paths the Layer 3 device supports to a value from 2 through 8. On RUCKUS ICX 7650, ICX 7750, and ICX 7850 devices, the value range for the maximum number of load-sharing paths is from 2 through 32. Maximum

packets, or OpenFlow is configured. Counters or logging information is unavailable for uRPF hits. After enabling reverse path check, you must reload the device for uRPF to be programmed. Tunnel over user VRF should not be configured on a device on which uRPF is enabled. ICX 7850, ICX 7750, ICX 7650

for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. The following example shows sample output from the show bfd applications command. device> show bfd applications show bfd applications Protocols Registration Count for VRF [default]: 3 Protocol Parameter Global-Holdtime HA State bgp 1 0 none static 0 0 none ospf 1 0 none Release version Command history 08.0.90 This command was introduced.

enable-tcp-mss enable-tcp-mss enable-tcp-mss Enables the Transmission Control Protocol (TCP) maximum segment size (MSS) feature. enable-tcp-mss no enable-tcp-mss TCP-MSS is disabled. Global configuration mode The command is applicable for ICX 7650 and ICX 7750 devices only. The command is

enable-tcp-mss enable-tcp-mss enable-tcp-mss Enables the Transmission Control Protocol (TCP) maximum segment size (MSS) feature. enable-tcp-mss no enable-tcp-mss TCP-MSS is disabled. Global configuration mode The command is applicable for ICX 7650 and ICX 7750 devices only. The command is