-
chassis fanless
Last Updated
Sep 03, 2026
fanless mode for a specified unit. all Enables fanless mode in all supported units of stack. Global configuration mode ICX 8200-24, ICX 8200-24P, ICX 8200-48, ICX 8200-48P, ICX 8200-48PF, ICX 7150-24P, and ICX 7150-48P devices support fanless mode. ICX 8200-24, ICX 8200-24P, ICX 8200-48, ICX 8200-48P
-
Fanless Mode Support
Last Updated
Sep 03, 2026
when configuring fanless mode. ICX 7150-ES, ICX 7150-24P, ICX 7150-48P, ICX 8100-24P, ICX 8100-48P, ICX 8200-24, ICX 8200-24P, ICX 8200-48, ICX 8200-48P, and ICX 8200-48PF devices support fanless mode. Even if fanless mode is configured on a switch, fans will be turned on temporarily during bootup or
-
Fanless Mode Support
Last Updated
Sep 03, 2026
when configuring fanless mode. ICX 7150-ES, ICX 7150-24P, ICX 7150-48P, ICX 8100-24P, ICX 8100-48P, ICX 8200-24, ICX 8200-24P, ICX 8200-48, ICX 8200-48P, and ICX 8200-48PF devices support fanless mode. ICX 8100-24P, ICX 8100-48P, ICX 8200-24, ICX 8200-24P, ICX 8200-48, ICX 8200-48P, and ICX 8200-48PF
-
New in This Document
Last Updated
Sep 03, 2026
reserved-vlan map show running-config supportsave Deprecated Commands for FastIron 10.0.20 No commands have been deprecated for this release. Beginning with the FastIron 08.0.61 release, Layer 3 features for the RUCKUS ICX 7150 are supported. The following Layer 3 features are not supported for the RUCKUS
-
Supporting Untagged Traffic on OpenFlow Hybrid Ports on Protected and Unprotected VLANs
Last Updated
Sep 03, 2026
protected VLAN. The configuration is accepted and untagged traffic on port 1/1/1 is dropped. device(config-vlan-400)# no untagged ethernet 1/1/1 Case 5: An untagged unprotected VLAN is configured as a protected VLAN on a port. For RUCKUS ICX 7150, ICX 7650, and , the configuration is accepted and untagged
-
New in This Document
Last Updated
Sep 03, 2026
command allows you to specify a port for connecting to SmartZone. Configuring a Custom Port Number for Connection to SmartZone Precision Time Protocol (PTP) and Transparent Clock Adds support for ICX 7150-48ZP model. Precision Time Protocol 1G Breakout 1G Breakout enables the configuration of 1G
-
show tech-support
Last Updated
Sep 03, 2026
command is useful when collecting a large amount of information about the RUCKUS FastIron devices for troubleshooting purposes. The output of this command can be used by technical support representatives when a problem is reported. Licensing and stacking is not supported on ICX 7150-ES and ICX 8100
-
show tech-support
Last Updated
Sep 03, 2026
command is useful when collecting a large amount of information about the RUCKUS FastIron devices for troubleshooting purposes. The output of this command can be used by technical support representatives when a problem is reported. Licensing and stacking is not supported on ICX 7150-ES and ICX 8100
-
Last Updated
Sep 03, 2026
and Feature Limitations for IGMP Snooping and Layer 3 Multicast Routing Configuration Notes and Feature Limitations for IGMP Snooping and Layer 3 Multicast Routing MAC-based Forwarding Implementation on ICX 7150-C08P Devices MAC-based Forwarding Implementation on ICX 7150-C08P Devices IGMP Snooping
-
permit (Standard IPv4 ACLs)
Last Updated
Sep 03, 2026
0.0.0.255 in the wildcard mask format. For RUCKUS ICX 7150 and ICX 7750 devices, ACL logging is not supported for egress ACLs. For the log keyword to trigger a log entry, logging must be enabled with the logging enable command. To delete a rule from an ACL, use the no permit command followed by the