Search Results: "icx 7150"

MACsec configuration and secure channel activity for a particular interface. The following show macsec statistics command output is for an ICX 7150 device. device# clear macsec statistics ethernet 10/2/1 device# show macsec statistics ethernet 10/2/1 Interface Statistics: --------------------- rx

stack trunk debugging. Privileged EXEC mode The no form of this command deactivates stack debugging. ICX 7150-ES and ICX 8100 devices do not support stacking. The following example activates stack debugging. device# debug stacking

configurations. The following example shows how to enable web management for HTTPS access. device(config)# web-management https Release version Command history 08.0.92 This command was modified for ICX 7150-C08PT devices to restrict command options to HTTP and HTTPS only. 09.0.00 This command was

Support for Multicast Multi-VRF Support for Multicast Multi-VRF Support for Multicast Multi-VRF PIM sparse mode (PIM-SM) and PIM dense mode (PIM-DM) are supported by the Multicast Multi-VRF feature on Ruckus devices. Multicast Multi-VRF is not supported for ICX 7150 devices. The procedure for

Campus Fabric Layer 3 unicast considerations Campus Fabric Layer 3 unicast considerations Campus Fabric Layer 3 unicast considerations The following table lists Layer 3 unicast features available in a Campus Fabric domain for ICX 7150, ICX 7250, or ICX 7450 devices enabled as PE units. Layer 3

cannot be used when port LEDs are turned on to locate a device. If the status mode is changed, the LED status will be changed to the respective mode. The LED ON/OFF feature is supported only on the platforms where LED status mode is available. The status mode is supported on the ICX 7150, ICX 7650

timer for ICX 7250 and ICX 7150 devices is 3 minutes. Global configuration mode Interface configuration mode When Digital Optical Monitoring (DOM) is enabled, the system continuously monitors the temperature and signal power levels of the optical transceivers. If the optical operating conditions fall

memory level8-2/3 2/3 of the buffers in buffer memory Global configuration mode This command is supported only on the Ruckus ICX 7150. After creating the profile, you can attach it to one or more ports. You must use the no egress-buffer-profile command to detach a profile from any ports that are using it

" topic for the default, maximum, and minimum allocations. If you disable IPv6 routing, the TCAM space allocations do not change. If you want to allocate the maximum possible space for IPv4 routing information, you must configure the TCAM space manually. The ICX 7150 and ICX 7250 devices permit only

Number of ECMP Load Sharing Paths per Device ICX 7150 / ICX 7250 / ICX 7450 / ICX 7550 ICX 7650 / ICX 7750 / ICX 7850 8 32 For optimal results, set the maximum number of paths to a value at least as high as the maximum number of equal-cost paths your network typically contains. For example, if the