Search Results: "icx 7150"

memory level8-2/3 2/3 of the buffers in buffer memory Global configuration mode This command is supported for RUCKUS ICX 8200 and ICX 7150 devices only. After creating the profile, you can attach it to one or more ports. You must use the no egress-buffer-profile command to detach a profile from any ports

memory level8-2/3 2/3 of the buffers in buffer memory Global configuration mode This command is supported for RUCKUS ICX 8200 devices only. This command is supported for RUCKUS ICX 8200 and ICX 7150 devices only. After creating the profile, you can attach it to one or more ports. You must use the no

suppression on a route-only port. Ruckus ICX 7450, ICX 7250, ICX 7750, and RUCKUS ICX 7150 devices support only ingress L2 traffic suppression on a route-only port. To disable Layer 2 switching only on a specific interface, go to the interface configuration level for that interface, and then

Setting the Bandwidth Value for a Tunnel Interface Setting the Bandwidth Value for a Tunnel Interface Setting the Bandwidth Value for a Tunnel Interface The current bandwidth value for a tunnel interface can be set and communicated to higher-level protocols such as OSPF. ICX 7150 and ICX 8100

ECMP Load Sharing Paths per Device ICX 7150 / ICX 7550 / ICX 8200 ICX 7650 / ICX 7850 8 32 For optimal results, set the maximum number of paths to a value at least as high as the maximum number of equal-cost paths your network typically contains. For example, if the Layer 3 switch you are configuring

Setting the bandwidth value for a tunnel interface Setting the bandwidth value for a tunnel interface Setting the bandwidth value for a tunnel interface The current bandwidth value for a tunnel interface can be set and communicated to higher-level protocols such as OSPF. ICX 7150 devices do not

ECMP Load Sharing Paths per Device ICX 7150 / ICX 7250 / ICX 7450 / ICX 7550 ICX 7650 / ICX 7850 8 32 For optimal results, set the maximum number of paths to a value at least as high as the maximum number of equal-cost paths your network typically contains. For example, if the Layer 3 switch you are