-
Planning to Build a Stack with 802.1br Switch Port Extender Capability
Last Updated
Sep 03, 2026
multiple units. ICX 7150, ICX 7250, and ICX 7450 devices can be configured as PE units attached to the CB. PE units can be attached to any CB unit. While a stack may include up to 12 units, a CB stack of no more than four units is recommended. ICX 7750 breakout ports can be used with an 802.1br SPX
-
ISSU Limitations and Considerations
Last Updated
Sep 03, 2026
ISSU Limitations and Considerations ISSU Limitations and Considerations ISSU Limitations and Considerations When using ISSU, consider the following capabilities and restrictions: ISSU is supported on FastIron ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750 and ICX 7850 stackable hardware
-
chassis fanless
Last Updated
Sep 03, 2026
fanless mode for a specified unit. all Enables fanless mode in all supported units of stack. Global configuration mode ICX 8200-24, ICX 8200-24P, ICX 8200-48, ICX 8200-48P, ICX 8200-48PF, ICX 8100-24P, ICX 8100-48P, ICX 8100-24P-X, ICX 8100-48P-X, ICX 7150-24P, and ICX 7150-48P devices support fanless
-
Last Updated
Sep 03, 2026
RUCKUS ICX Switches
Product Guides
Install and Upgrade
Licenses Installed Determining the Current Licenses Installed Upgrade Considerations for Licensed Features Upgrade Considerations for Licensed Features Upgrading from FastIron 08.0.70 or Earlier to 09.0.10a or Later for the ICX 7150, ICX 7250, ICX 7450, and ICX 7650 Upgrading from FastIron 08.0.70 or
-
Supported ICX Models
Last Updated
Sep 03, 2026
Supported ICX Models Supported ICX Models Supported ICX Models The following ICX switch models can be managed from SmartZone: ICX Firmware Versions Compatible with SmartZone ICX Model First Supported FastIron-SZ Compatible Release Last Supported FastIron Release ICX 7150 SmartZone does not support
-
Supported ICX Models
Last Updated
Sep 03, 2026
Supported ICX Models Supported ICX Models Supported ICX Models The following ICX switch models can be managed from SmartZone: ICX Firmware Versions ICX Model First Supported FastIron Release Last Supported FastIron Release ICX 7150 SmartZone does not support ICX 7150-ES devices. 08.0.80a 09.0.10a
-
VLAN Mapping
Last Updated
Sep 03, 2026
command. Execute the following steps to configure VLAN mapping for RUCKUS ICX 7150, ICX 7150-ES, ICX 7550, ICX 7650, and ICX 7850 devices. Enter the global configuration mode. device# configure terminal Define the interface on which VLAN mapping needs to be enabled. device(config)# interface ethernet 1
-
show version
Last Updated
Sep 03, 2026
> CLI. This information is displayed for each unit in a standalone or stacking environment. From the FastIron 8.0.92 release onwards, ICX 7150-C08P supports a BCM53443 SoC chipset.Older builds cannot download on ICX 7150-C08P devices with BCM53443 SoC. The following table shows the reason for the
-
ICX-Management Feature Support Matrix
Last Updated
Sep 03, 2026
Supported FastIron Release ICX 7150 08.0.80a 09.0.10a and subsequent patches ICX 7150-C08P, -C08PT, -24F, -10ZP 08.0.92 09.0.10a and subsequent patches ICX 7250 08.0.80a 09.0.10a and subsequent patches ICX 7450 08.0.80a 09.0.10a and subsequent patches ICX 7550 08.0.95a - ICX 7650 08.0.80a - ICX 7750
-
Rate shaping configuration notes
Last Updated
Sep 03, 2026
Gbps ports 8 Kbps 40,000,000 Kbps RUCKUS ICX 7650 100 Gbps ports 8 Kbps 100,000,000 Kbps RUCKUS ICX 7450 1 Gbps ports 8 Kbps 999,936 Kbps RUCKUS ICX 7450 10 Gbps ports 128 Kbps 10,000,000 Kbps RUCKUS ICX 7450 40 Gbps ports 8 Kbps 40,000,000 Kbps RUCKUS ICX 7250 1 Gbps ports 8 Kbps 999,936 Kbps RUCKUS ICX 7250 10 Gbps ports 128 Kbps 10,000,000 Kbps RUCKUS ICX 7150 1 Gbps ports 8 Kbps 999,936 Kbps RUCKUS ICX 7150 10 Gbps ports 128 Kbps 10,000,000 Kbps