-
BGP4 - IPV4 Border Gateway Protocol
Last Updated
Sep 03, 2026
BGP4 - IPV4 Border Gateway Protocol BGP4 - IPV4 Border Gateway Protocol BGP4 - IPV4 Border Gateway Protocol Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 BGP4 No No 08.0.20 08.0.95 08.0.70 08.0.90 BGP4 Graceful Restart No No 08.0.20 08.0.95 08.0.70 08.0.90 BGP4 Graceful Restart
-
SSH - Secure Shell
Last Updated
Sep 03, 2026
SSH - Secure Shell SSH - Secure Shell SSH - Secure Shell Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 SCP 08.0.60 10.0.10d 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 SSH 08.0.60 10.0.10d 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 Secure Shell (SSH) version 2 08.0.60
-
IP Multicast Protocols
Last Updated
Sep 03, 2026
.. ip igmp max-group-address: Configures the maximum number of IGMP addresses for the default virtual routing and forwarding (VRF) instance or for a specified VRF. The ip igmp max-group-address command replaces the system-max igmp-max-group-address command. For ICX 7850 and ICX 7550 devices, values
-
Support for Multicast Multi-VRF
Last Updated
Sep 03, 2026
.. ip igmp max-group-address: Configures the maximum number of IGMP addresses for the default virtual routing and forwarding (VRF) instance or for a specified VRF. The ip igmp max-group-address command replaces the system-max igmp-max-group-address command. For ICX 7850 and ICX 7550 devices, values
-
Support for Multicast Multi-VRF
Last Updated
Sep 03, 2026
-address command. For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile. Refer to the forwarding-profile command in the RUCKUS FastIron Command Reference and the Configuration Fundamentals chapter in the RUCKUS FastIron Management Configuration Guide for more information
-
optical-monitor
Last Updated
Sep 03, 2026
no optical-monitor non-ruckus-optic-enable Optical transceivers are not monitored. alarm-interval Specifies the interval at which alarms and warning messages are sent. The default and minimum timer for ICX 7450, ICX 7550, ICX 7650, RUCKUS ICX 7750, and ICX 7850 devices is 8 minutes. The default
-
Support for Multicast Multi-VRF
Last Updated
Sep 03, 2026
specified VRF. The ip igmp max-group-address command replaces the system-max igmp-max-group-address command. For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile. Refer to the forwarding-profile command in the RUCKUS FastIron Command Reference and the Configuration
-
Configuration Considerations for uRPF
Last Updated
Sep 03, 2026
, ICX 7550, ICX 7450, and ICX 7250 considerations Per-interface level configuration is available on VE interfaces and physical ports only. IPv4 and IPv6 unicast routed packets are subjected to uRPF check on ICX 7850, ICX 7750, and ICX 7650 devices. Scaling numbers are reduced by half for the following
-
Changing the Number of Load Sharing (ECMP) Paths for IPv4
Last Updated
Sep 03, 2026
Number of ECMP Load Sharing Paths per Device ICX 7150 / ICX 7250 / ICX 7450 / ICX 7550 ICX 7650 / ICX 7750 / ICX 7850 8 32 For optimal results, set the maximum number of paths to a value at least as high as the maximum number of equal-cost paths your network typically contains. For example, if the
-
Configuring the share port level for an egress buffer profile
Last Updated
Sep 03, 2026
portion of the total memory. The configuration of the egress buffer share port level is supported only on the RUCKUS ICX 7150. For the RUCKUS ICX 7250, ICX 7450, ICX 7650, ICX 7750, ICX 7850, and ICX 7550 devices, you can change the queue share level for an individual queue which has a finer