Search Results: "icx 7850"

IPv4 unicast VRF configuration mode BGP address-family IPv6 unicast VRF configuration mode This command is supported for Ruckus ICX 7750 and ICX 7850 devices. This command is supported for ICX 7850 devices only. It is recommended to use the default values. The no form of the neighbor { ip-address

. The default MTU for Ethernet II packets is 1500. The default MTU for SNAP packets is 1492. For ICX 7850 devices, the maximum jumbo frame size supported is 9380. When jumbo mode is enabled, the maximum ethernet MTU size is 9358 bytes. Interface subtype configuration mode If you set the MTU of a port

, power rating in megawatts, power consumed in megawatts, power conserved in megawatts, and the power efficiency of the system as a percentage. This command is not supported for RUCKUS ICX 7850 and ICX 7650 devices. The following example displays the power savings statistics for the device. device# show

EVPN address family configuration mode for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command removes the configured weight that the device adds to routes that are received from a specified BGP neighbor. The following example changes the weight from the default value of 0 for the

mode BGP L2VPN EVPN configurations. This command can be configured in BGP L2VPN EVPN address family configuration mode for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command removes the configured filters for the outgoing and incoming route updates to or from a particular BGP

. The default MTU for Ethernet II packets is 1500. The default MTU for SNAP packets is 1492. For ICX 7850 devices, the maximum jumbo frame size supported is 9380. When jumbo mode is enabled, the maximum ethernet MTU size is 9358 bytes. Interface subtype configuration mode If you set the MTU of a port

allowed. ICX 7150 devices permit only manual configuration of IPv4 routes. ICX 7150-ES devices only support static IPv4 routes. For ICX 7550, ICX 7850, ICX 8100, and ICX 8200 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is

devices. For ICX 7550 and ICX 7850, values for IP routes and IPv6 routes are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command in the RUCKUS FastIron

device. If the status mode is changed, the LED status will be changed to the respective mode. The LED ON/OFF feature is supported only on the platforms where LED status mode is available. The status mode is supported on the ICX 7150, ICX 7650, and ICX 7850 devices. The default LED status is the

Manageability Feature Scaling Manageability Feature Scaling Manageability Feature Scaling Feature ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Number of TACACS Servers 8 8 8 8 8 8 8 Number of RADIUS Servers 8 8 8 8 8 8 8 Number of SSH inbound/outbound sessions 5 - Inbound