Command history 08.0.20 This command was introduced. 08.0.30 Support for this command was added on ICX 7450 devices. 08.0.70 Support for this command was added on ICX 7650 devices. 08.0.90 Support for this command was added on ICX7850 devices.
this command was added on ICX 7450 devices. 08.0.70 Support for this command was added on ICX 7650 devices. 08.0.90 Support for this command was added on ICX7850 devices.
.. ip igmp max-group-address: Configures the maximum number of IGMP addresses for the default virtual routing and forwarding (VRF) instance or for a specified VRF. The ip igmp max-group-address command replaces the system-max igmp-max-group-address command. For ICX7850 and ICX 7550 devices, values
.. ip igmp max-group-address: Configures the maximum number of IGMP addresses for the default virtual routing and forwarding (VRF) instance or for a specified VRF. The ip igmp max-group-address command replaces the system-max igmp-max-group-address command. For ICX7850 and ICX 7550 devices, values
-address command. For ICX7850 and ICX 7550 devices, values are used from the forwarding profile. Refer to the forwarding-profile command in the RUCKUS FastIron Command Reference and the Configuration Fundamentals chapter in the RUCKUS FastIron Management Configuration Guide for more information
this command was added on ICX 7450 devices. 08.0.70 Support for this command was added on ICX 7650 devices. 08.0.90 Support for this command was added on ICX7850 devices.
08.0.90 The output for this command was updated to display information about the selected forwarding profile and the related scale numbers for ICX7850 devices. 08.0.95 The output for this command was updated to not display information about the maximum number of DHCP snooping entries.
no optical-monitor non-ruckus-optic-enable Optical transceivers are not monitored. alarm-interval Specifies the interval at which alarms and warning messages are sent. The default and minimum timer for ICX 7450, ICX 7550, ICX 7650, RUCKUS ICX 7750, and ICX7850 devices is 8 minutes. The default
08.0.90 The output for this command was updated to display information about the selected forwarding profile and the related scale numbers for ICX7850 devices. 08.0.95 The output for this command was updated to not display information about the maximum number of DHCP snooping entries.
Command history 08.0.20 This command was introduced. 08.0.30 Support for this command was added on ICX 7450 devices. 08.0.70 Support for this command was added on ICX 7650 devices. 08.0.90 Support for this command was added on ICX7850 devices.