Search Results: "icx 7850"

debugging information about the BFD state. vrf vrf-id Displays debugging information about BFD for the specified VRF. Privileged EXEC mode This command is supported for ICX 7850 device. The following example displays debugging information about the BFD holdtime. device# debug bfd holdtime BFD: holdtime

multicast MAC address. vlan vlan-id Specifies a VLAN. User EXEC mode IGMP snooping is MAC-based for ICX 7150-C08 device, for all other devices it is IP-based. The show ip multicast mac-mcache command is available only for ICX 7150-C08 model. This command is not supported for RUCKUS ICX 7850 and ICX

. For ICX 7650 devices, valid values range from 256 through 8000. For ICX 7150 devices, valid values range from 256 through 3072. Global configuration mode For ICX 8200, ICX 8100, ICX 7850, and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values

7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7750 512 1024 ICX 7850 512 1024 ICX 8100 512 2048 ICX 8200 512 2048 The no form of the command resets the number of allowable entries in the static ARP table to the default value. The following example increases the maximum

7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7750 512 1024 ICX 7850 512 1024 The no form of the command resets the number of allowable entries in the static ARP table to the default value. The following example increases the maximum number of static ARP table entries you

debugging information about the BFD state. vrf vrf-id Displays debugging information about BFD for the specified VRF. Privileged EXEC mode This command is supported for Ruckus ICX 7750 and ICX 7850 devices. The following example displays debugging information about the BFD holdtime. device# debug bfd

replication ports. For ICX 7750, ICX 7650, and ICX 7850 devices, l2mc is replaced with ipmc in the output. ref_cnt Indicates the number of IP multicast mcache entries using this mac mcache entry. Mcast group The IPv4 multicast group address. Src Addr IPv4 multicast source address. OIF Outgoing

mode is enabled, the default Ethernet MTU size is 9216. The maximum Ethernet MTU size is 10178. For ICX 7850 devices, the maximum jumbo frame size supported is 9380. When jumbo mode is enabled, the maximum ethernet MTU size is 9358 bytes. The IPv6 MTU functionality is applicable to VEs and physical IP

extenders (PEs), or PE units, to a set of ICX 7650, ICX 7750, or ICX 7850 stack units configured as the control bridge (CB). The CB stack must contain units of the same model family but can contain different stackable SKUs for that model family. The CB provides a single point of management for the

31-Bit Subnet Masks on Point-to-Point Networks 31-Bit Subnet Masks on Point-to-Point Networks 31-Bit Subnet Masks on Point-to-Point Networks 31-bit subnet masks are supported on ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750, and ICX 7850 devices running the full Layer 3 image. To