|
ruckusZDWLANConfigTable (SNMPv3 only)
|
ruckusZDWLANID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.1
|
WLAN ID for this Wireless LAN (WLAN). Max value: for zd1000 zd1100, 128; for zd3000,1024;for
zd5000, 2048.
|
| |
ruckusZDWLANConfigSSID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.2
|
SSID for this Wireless LAN. It can't be modified after creating it.
|
| |
ruckusZDWLANConfigDescription
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.3
|
Description for this Wireless LAN.
|
| |
ruckusZDWLANConfigName
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.4
|
Name for this Wireless LAN.
|
| |
ruckusZDWLANConfigWLANServiceType
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.8
|
Select The the Service type for the Wireless LAN.for hotSpotService,only read-only.
|
| |
ruckusZDWLANConfigAuthentication
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.10
|
Authentication method chosen for this Wireless LAN.
|
| |
ruckusZDWLANConfigEncryption
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.12
|
Encryption method chosen for this Wireless LAN.
|
| |
ruckusZDWLANConfigWEPKeyIndex
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.15
|
Select the WEP key index for the WEP encryption.
|
| |
ruckusZDWLANConfigWEPKey
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.16
|
Enter the Pass-phrase for the WEP encryption method.Only 10 or 26 Hex character.such
as: 1122334455.
|
| |
ruckusZDWLANConfigWPACipherType
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.20
|
Enter the encryption cipher method for the WPA encryption.
|
| |
ruckusZDWLANConfigWPAKey
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.21
|
Enter the Pass-phrase for the WPA encryption.Specifies the WPA PSK (Wi-Fi Protected
Access Pre Shared key) If the key length is 64 then all 64 characters should be in
hex,otherwise the key assumed to be ascii.
|
| |
ruckusZDWLANConfigAuthenticationServerID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.25
|
Select the Authentication Server by the registered Server ID.This server id must exist
in table: ruckusZDAAAConfigTable(aaa-authentication) or local.
|
| |
ruckusZDWLANConfigWirelessClientIsolation
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.28
|
Set Wireless Client Isolation. Clients will be unable to communicate with each other
or access restricted subnets.
|
| |
ruckusZDWLANConfigWirelessWhiteListID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.29
|
Make sure client isolation is enabled and then choose one id.
|
| |
ruckusZDWLANConfigZeroITActivation
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.30
|
Enable the Zero IT Activation Service of the Wireless LAN or not.
|
| |
ruckusZDWLANConfigWLANHotspotID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.31
|
Select the Hotspot Server for the Wireless LAN.
|
| |
ruckusZDWLANConfigWLANServicePriority
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.32
|
Select the QOS service priority for the Wireless LAN.
|
| |
ruckusZDWLANConfigAccountingServerID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.35
|
Select the (RADIUS) Accounting Server by the registered Server ID. 0,disable;This
server ID must exist in table: ruckusZDAAAConfigTable (AAA-accounting)
|
| |
ruckusZDWLANConfigAccountingUpdateInterval
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.36
|
Enter interval in minutes to update Accounting Server.
|
| |
ruckusZDWLANConfigUplinkRate
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.40
|
Disable or Set the Speed/Rate limiting of uplink. Valid range 0.25mbps~20.00mbps in
0.25mbps steps. Examples: 'disable', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'
|
| |
ruckusZDWLANConfigDownlinkRate
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.41
|
Disable or Set the Speed/Rate limiting of downlink. Valid range 0.25mbps~20.00mbps
in 0.25mbps steps. Examples: 'disable', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'
|
| |
ruckusZDWLANConfigIGMPSnooping
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.42
|
IGMP Snooping state of the WLAN.
|
| |
ruckusZDWLANConfigVlanID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.45
|
Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be
untagged.
|
| |
ruckusZDWLANConfigDynamicVLAN
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.46
|
Enable the Service of the dynamic Wireless LAN or not.For 802.1x EAP + MAC Address
model,'set' is not supported.
|
|
|
ruckusZDWLANConfig802dot11d
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.47
|
Enable 802.11d.
|
|
|
ruckusZDWLANConfigOfdmonly
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.48
|
Enable OFDM-only.
|
|
|
ruckusZDWLANConfigBSSMinrate
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.49
|
Set BSS-minrate. If OFDM-only is disabled, the value should be: 0, 1, 2, 5.5, 12,
24 (Mbps). if ODM-only is enabled, the value should be: 0, 12, 24 (Mbps), the default
value is 0.
|
| |
ruckusZDWLANConfigHideSSID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.50
|
Hide SSID; do not broadcast SSID.
|
| |
ruckusZDWLANConfigTunnelMode
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.52
|
Enable Tunnel support capability for the Wireless LAN.
|
| |
ruckusZDWLANConfigBackgroundScanning
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.53
|
Select Background Scanning support capability for the Wireless LAN.
|
| |
ruckusZDWLANConfigMaxClientsPerAP
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.55
|
Select the Number of client devices the AP can service for the Wireless LAN.
|
| |
ruckusZDWLANConfigWebAuthentication
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.60
|
Enable WEP Authentication or not.
|
| |
ruckusZDWLANConfigRowStatus
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.63
|
Create, Delete Administration control for this Wireless LAN. 1: ACTIVE state, only
for read; 4: CREATEANDGO, create a new table; 6: DESTROY, delete an existing table.
|
|
ruckusZDWLANGroupConfigTable
(SNMPv3 only)
|
ruckusZDWLANGroupID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.1
|
WLAN Group ID. It can't be modified after creating it.Max value: for zd1000 and zd1100,
128; for zd3000, 1024; for zd5000,2048
|
| |
ruckusZDWLANGroupConfigName
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.5
|
Name for this Wireless LAN Group.
|
| |
ruckusZDWLANGroupConfigDescription
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.6
|
Description for this Wireless LAN Group.
|
| |
ruckusZDWLANGroupVlanOverrideStatus
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.8
|
Enable VLAN Override for the Wireless LAN Group.
|
| |
ruckusZDWLANGroupConfigRowStatus
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.15
|
Create, Delete Administration control for this Wireless LAN Group. 1: ACTIVE state,
only for read; 4: CREATEANDGO, create a new table; 6: DESTROY, delete an existing
table.
|
|
ruckusZDWLANGroupCfgAttrTable
(SNMPv3 only)
|
ruckusZDWLANGroupCfgAttrOverrideType
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1.3
|
WLAN group VLAN Override Type.
|
| |
ruckusZDWLANGroupCfgAttrWGVlanTag
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1.4
|
WLAN group VLAN tag. For set, range is 1-4094. For get,, range is 0-4094. 1: If VLAN
ID is 1, packets from this WLAN will be untagged; 0: for node ruckusZDWLANGroupCfgAttrOverrideType
is nochange
|
| |
ruckusZDWLANGroupCfgAttrRowStatus
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1.10
|
Create, Delete Administration control for this Wireless LAN group attr. 1: ACTIVE
state, only for read; 4: CREATEANDGO, create a new table; 6: DESTROY, delete an existing
table.
|
|
ruckusZDHotspotConfigTable
(SNMPv3 only)
|
ruckusZDHotspotID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.1
|
Hotspot ID.
|
| |
ruckusZDHotspotName
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.2
|
Name for this Hotspot.Can't be modified if created.
|
| |
ruckusZDHotspotRedirectLoginPage
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.3
|
Redirect unauthenticated user to this for authentication. It is URL or IP address.
|
| |
ruckusZDHotspotRedirectStartURL
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.4
|
After user is authenticated, redirect to this URL if the redirect type is URL.
|
| |
ruckusZDHotspotRedirectType
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.6
|
To decide the redirect target. If it is user, redirect to the user intends to visit.
|
| |
ruckusZDHotspotRowStatus
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.15
|
Create, Delete Administration control for this Hotspot.
|
|
ruckusZDClientIsolationWhiteListTable
|
ruckusZDClientIsolationWhiteListID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.15.1.1
|
Client Isolation White List ID. It can't be modified after creating it.
|
| |
ruckusZDClientIsolationWhiteListName
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.15.1.5
|
Name for this Client Isolation White List.
|
| |
ruckusZDClientIsolationWhiteListDescription
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.15.1.6
|
Description for this Client Isolation White List.
|
| |
ruckusZDClientIsolationWhiteListRowStatus
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.15.1.6
|
Create, Delete Administration control for this Client Isolation White List.
1. ACTIVE state, only for read;
4. CREATEANDGO, create a new table;
6. DESTROY, delete an existing table.
|
|
ruckusZDClientIsolationWhiteListRuleTable
|
ruckusZDClientIsolationWhiteListRuleID
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.16.1.1
|
WLAN Client Isolation White List Rule ID.
|
| |
ruckusZDClientIsolationWhiteListRuleDescription
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.16.1.3
|
Description for this Client Isolation White List Rule.
|
| |
ruckusZDClientIsolationWhiteListRuleMac
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.16.1.5
|
MAC address.
|
| |
ruckusZDClientIsolationWhiteListRuleDesAddr
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.16.1.6
|
IP address.
|
| |
ruckusZDClientIsolationWhiteListRuleRowStatus
|
1.3.6.1.4.1.25053.1.2.2.2.1.1.16.1.10
|
Create, Delete Administration control for this Wireless LAN group attr.
1. ACTIVE state, only for read;
4. CREATEANDGOcreate a new table;
6. DESTROY, delete a existing table.
|