Determining the Query Interval for AP Related Tables
Use snmpwalk to get an OID of the AP related table to determine the time to complete the snmpwalk for a single OID.
- Scenario 1
: Using simple snmpwalk
If you are unable to write your own script as suggested in Timeout the approximate time for an OID may be between the range of 1 to 4 minutes per seconds. This is based on lab environments tested in Ruckus.
The efficiency is improved in 3.6.1 as:
a: For 1,000 APs the minimum time is 54 seconds (< 1 minute) for a full table
b: For 10,000 APs the minimum time is 203 seconds (< 2 minutes) for a full table.
For example, in an environment with 10,000 APs and 1000 WLANs, the values are:
MIB Table SNMPWalk Elapsed Time Comment RUCKUS-SCG-WLAN-MIB::ruckusWLANTable 41 seconds RUCKUS-SCG-WLAN-MIB::ruckusSCGWLANTable 42 seconds RUCKUS-SCG-WLAN-MIB::ruckusWLANAPTable 203 seconds RUCKUS-SCG-WLAN-MIB::ruckusSCGAPTable 107 seconds RUCKUS-SCG-CONFIG-WLAN-MIB::ruckusSCGConfigWLANTable 50 seconds Timeout should be set as 25+ seconds. Note: The exact value should be tested in your own environments.