New AP Firmware Release Features
The following software features are
introduced in these AP firmware releases.
New AP Firmware Features - 7.2.0.620.5111
| Feature | Description |
|---|---|
| Automatic Switch Firmware Upgrade for H670 Series Access Points | H670-family APs now support automatic upgrade of the integrated
4-port switch firmware during the AP boot process, helping ensure that
the switch runs the validated firmware version bundled with the AP
software release.
Note: This feature is disabled by
default. Contact RUCKUS Customer Support
for upgrade procedures and additional information.
Note: Switch firmware version 1.1.63
addresses a rare issue in which LAN-connected devices occasionally
fail to obtain an IP address or pass traffic after an AP reboot. The
upgrade is required only if the issue occurs. When an upgrade to
version 1.1.63 is required, RUCKUS recommends completing the update
in a controlled environment with stable power and under the
supervision of a technical support representative.
Contact RUCKUS Customer Support for upgrade procedures and additional information. |
| Vendor-specific DHCPv4 Device Identification Information | APs now include additional vendor-specific information in DHCPv4 Discover and Request messages. DHCP Option 124 carries the RUCKUS Enterprise ID (25053), and DHCP Option 125 includes the following device identity and software attributes:This enhancement improves device identification and authorization workflows in DHCP-based environments and aligns DHCPv4 metadata reporting with DHCPv6 behavior. |
| R370 support for MAC Authentication with Captive Portal Workflows | The R370 AP supports MAC Authentication integration with WISPr/Hotspot WLANs. RUCKUS One uses MAC-based RADIUS authentication before displaying the captive portal, enabling automatic login, portal bypass, redirection, or access denial based on the RADIUS server response. This feature supports service provider and hospitality deployments that require MAC-based auto-login and customized captive portal workflows. |
| R370 Access Point Stability and Performance Improvements | AP R370 Reliability
and Performance Enhancements: The resolved issues and
improvements for the R370 AP in this release address kernel panics, AP
system failures, client authentication and roaming issues, platform
configuration, radio operation, and ChannelFly® performance, resulting
in enhanced reliability and a better overall user experience. Stability and Reliability Improvements:
Client Connectivity Improvements:
Configuration and System Improvements:
|
Note: The new features for AP firmware release 7.2.0.610.1360 do not
apply to R370.
New AP Firmware Features - 7.2.0.610.1360
New AP Firmware Features - 7.1.1.531.6213
New AP Firmware Features - 7.1.1.530.5225
| Feature | Description |
|---|---|
| Support for 6 GHz Indoor Bands in Korea and Japan for Wi-Fi 6E Compliance | Introduced support for 6 GHz indoor frequency bands: 5925–7125 MHz for Korea and 5925–6425 MHz for Japan, enabling enhanced Wi-Fi 6E connectivity in compliance with regional regulations. |
| CVE Patches & AP Enhancements for Security and Performance | Implemented CVE-related security patches and integrated critical AP feature enhancements to strengthen system security and improve overall AP performance. |
| Multi-Link Operation (MLO) Support for R370 | For R370, Wi-Fi 7 clients can now connect across multiple radio bands
and dynamically switch between them, delivering higher throughput and
lower latency in compliance with the IEEE 802.11be (Wi-Fi 7)
standard.
Note: The Wi-Fi 7 Multi-Link
Operation (MLO) feature is available but requires client OS and
driver support. WPA3 encryption is mandatory when using MLO to
ensure network security.
|
| Wi-Fi Calling Enhancements on R370 for Superior Voice Quality | The RUCKUS Wi-Fi Calling feature on R370 improves voice call quality by reducing latency, jitter, and roaming delays across Wi-Fi networks. |
New AP Firmware Features - 7.1.1.520.830
| Feature | Description |
|---|---|
| ANQP Metrics | Access Network Query Protocol (ANQP) success, failure, and attempt counts are now available in RUCKUS One and RUCKUS AI. |
| Improved Roaming with 802.11r Over-the-DS Fast Transition | Roaming performance has been improved with support for IEEE 802.11r Over-the-DS Fast Transition, enabling faster and smoother client handoffs between access points. |
| Tri-Band APs Show Mesh Channel in Table for Better Backhaul Visibility | Tri-band APs now display the current Mesh operating channel directly in the Mesh table, enhancing visibility into backhaul link selection across the 5 GHz and 6 GHz bands. |
| RUCKUS One PreEngine API Now Supports 6 GHz for Full LBS Coverage | Extended RUCKUS One PreEngine API support to include the 6 GHz (third radio) band on APs, enabling comprehensive LBS data collection across all bands. |
| Wi-Fi 7 MLO Boosts Performance | IEEE 802.11be (Wi-Fi 7) introduces Multi-Link Operation (MLO), enabling seamless traffic steering and enhanced performance across multiple frequency bands. Current access points support Enhanced Multi-Link Single-Radio (eMLSR) mode, allowing client devices to monitor multiple links while transmitting on one, thereby reducing latency and improving efficiency. |
| Improved TX Power & 6 GHz Support | Enhancements to TX power and 6 GHz support have been implemented across Venue, Wi-Fi, and AP configurations, improving visibility, compliance, and performance in multi-band deployments. |
| AFC Enables 6 GHz in Canada | Added Automated Frequency Coordination (AFC) support for 6 GHz operation in Canada, enabling compliant dynamic spectrum access for Wi-Fi 6E and Wi-Fi 7 access points. |
| Seychelles Support Added to RUCKUS One | Support for Seychelles (country code SC) has been added to RUCKUS One, enabling compliant access point deployments with region-specific power limits and certified model support. |
| Redundancy Support for SoftGRE Gateway in RUCKUS One | Added redundancy support allowing access points to automatically fall back to the primary wireless access gateway (WAG), otherwise known as the SoftGRE gateway, once it becomes reachable, ensuring optimal tunnel routing and service continuity. |
| Enhanced AP Properties: PoE Visibility in RUCKUS One | AP Properties now display PoE port speed, class, and allocated power—when supported by LLDP and PoE-powered access points—enhancing visibility into power negotiation and usage. |
| Embedded IoT Controller UI Integration in RUCKUS One | RUCKUS One now supports embedded access to the IoT Controller UI, enabling seamless management of IoT functions directly within the platform. This integration includes secure redirection, controller summary dashboards, and licensing support. |