OpenFlow v1.3.0 Actions

Each flow has a set of instructions that are executed when the packet matches the flow according to OpenFlow v1.3.0 specifications. Each flow can have only one instruction of each type.

A switch can reject a flow entry if it is unable to execute the instructions associated with the flow entry. In this case, the switch returns an unsupported flow error. Flow tables may not support every match, every instruction, or every action.

Instructions for OpenFlow Actions

Instruction Description
actions Adds specified actions to the action set.
next-table-id Indicates the next table in pipeline processing (one table is supported).
meter-id Directs the packet to the specified meter.
apply-actions Applies the specified actions immediately. The packet is modified and subsequent matching in the pipeline is done on the modified packet.
clear-actions Clears all the actions in the action set.
write-metadata Writes the metadata field from the mask.

RUCKUS ICX devices may support the actions listed in the following table.

Supported OpenFlow Actions

OpenFlow Action Supported on ICX
Process the packet through the specified group Yes
Add and remove tag Yes
Add newly inserted tags always as the outermost tags Yes
No explicit drop action (packet with empty action set should be dropped.) Yes
Modify the values of the packet header based on the field type Yes
Modify the TTL value No
Set the queue ID for the packet Yes
Normal Action mode Yes

Prerequisites for OpenFlow Actions

The following prerequisites apply to the OpenFlow actions:

  • Decrement TTL
    • Destination MAC address (DMAC) action is required; otherwise an error is sent to the controller.
    • The DMAC in the packet should be the router MAC address of the device. This is not enforced because the DMAC of the forwarding packet is unknown.
    • The Source MAC address (SMAC) is modified to the router MAC address.
    • The VLAN header is stripped after the action.
    • VLAN modification is supported (Push VLAN is not supported for tagged packets).
  • Multiple ports
    • When action is to send the packets on multiple ports, packet modification is not supported and an error message is generated if there are any actions.
  • Send to controller action
    • Send to controller action can be combined with single port or multiple port action.
    • Send to controller action with single port does support packet modification.
    • Send to controller action with multiple ports does not support packet modification.
  • VLAN modification
    • The port on which the packet is to be forwarded with VLAN modification should be part of the VLAN to be configured and the port must be added as tagged.
  • Destination MAC modification
    • VLAN header is stripped after DMAC modification.
    • VLAN modification is supported (Push VLAN is not supported for tagged packets).
Parent topic: Overview of OpenFlow v1.3.0