Changing a Port Priority

Follow these steps to change the QoS priority of a specific port.

Enter global configuration mode.
```
device# configure terminal
```

Enter interface configuration mode.

device(config)# interface ethernet 1/1/1

Set the port priority.
```
device(config-if-e1000-1/1/1)# priority 7
```
This step assigns priority 7 to untagged switched traffic received on port 1/1/1.

Return to privileged EXEC mode.
```
device(config-if-e1000-1/1/1)# end
```

Verify the configuration.

device# show interface brief
Port       Link    State   Dupl Speed Trunk Tag Pvid Pri MAC             Name
1/1/1      Down    None    None None  None  Yes 4000 7   cc4e.248b.b050  ERSPAN
1/1/2      Down    None    None None  None  No  5    0   cc4e.248b.b050
1/1/3      Down    None    None None  None  No  5    0   cc4e.248b.b052
1/1/4      Down    None    None None  None  No  5    0   cc4e.248b.b053
1/1/5      Down    None    None None  2     Yes N/A  0   cc4e.248b.b054
...

The interface priority is listed under the heading Pri.

Changing a Port Priority Configuration Example

device# configure terminal
device(config)# interface ethernet 1/1/1
device(config-if-e1000-1/1/1)# priority 7
device(config-if-e1000-1/1/1)# end
device# show interface brief

RUCKUS FastIron QoS and Traffic Management Configuration Guide, 09.0.10 53-1005716-11

Changing a Port Priority

Changing a Port Priority Configuration Example