Configuring OpenFlow hybrid port mode for devices

  1. Enable OpenFlow at the global configuration level.
  2. Configure the OpenFlow Controller.
  3. Configure the system maximum OpenFlow entries. (The default is 2048.)
  4. Configure the maximum OpenFlow flow-protected VLAN entries. (The default is 40.)
    Note: System reload is required once you change the system maximum values.
  5. Configure the maximum OpenFlow unprotected VLAN entries. (The default is 40.)
  6. Configure the protected VLANs on the port. A maximum of 40 protected VLANs can be configured on an OpenFlow port.
  7. Enable OpenFlow hybrid port mode on the desired interfaces.
  8. Configure a VE interface for the interface by specifying the protected or unprotected VLAN, and add routing entries.
Parent topic: OpenFlow Hybrid Port Mode