Conifguring a DPSK WLAN on a Ruckus SmartZone Controller
- Log in to your Ruckus SmartZone controller.
- Click the Wireless LANS tab.
- On the Wireless LANs screen, click the
+ Create button.
The Create WLAN Configuration appears. This screen is shown below (with each area of the screen in a collapsed view):Note: Unless otherwise specified in the remaining steps, you do not have to change default values. The procedure described here is specific to Cloudpath; for information about any fields that are not described here, refer to your controller documentation.
- Complete the General Options section of the screen:
- In the WLAN Usage section of the screen, use the default selection of Standard usage.
- In the Authentication Options section of the screen, be sure that the default selection of Open is selected.
- In the Encryptions Options section of the screen, you must select "WPA2," which expands
the section as follows:
Note: The Dynamic PSK field may appear in a different section of the screen on other versions of SmartZone.
- The Algorithm field must be AES, which is the default.
- In the Passphrase field, enter a passphrase for the DPSK WLAN that you are creating, and make note of this passphrase. The minimum length is eight characters.
- In the Dynamic PSK field, select
Internal. Once you make this selection, DPSK is enabled, and the screen expands again, allowing
you to complete the configuration of this section of the screen:
- In the DPSK Length field, enter a value that complies with the security policy of your company. The default is 62.
- For DPSK Type, choose the option that complies with the security policy of your company. The default is Secure DPSK.
- For DPSK Expiration, use the drop-down menu to select a value that complies with the security policy of your company. The default value is Unlimited.
- In the Accounting Server section, you can use the drop-down list to select an already-configured AAA accounting server, or you can use the + Create button to create one.
- In the Options section, you can use the default values, shown below:
- In the RADIUS Options section, you can use the default values, shown below:
- In the Advanced Options section, there are many fields (not shown here), but you can also use all the default values.
- Click OK to create the Wireless LAN with DPSK enabled.
Obtaining Information about the SmartZone Controller
You will need the following information when you perform the necessary configuration in Cloudpath.
- Obtain the Management IP address. Navigate to System > Cluster. In the Control Planes section of the screen, shown below, locate the IP address under "IP (Management and AP Control." Be sure to write down this IP address because you will need it during configuration on your Cloudpath system.
- Enable Northbound Portal Interface Support. Navigate to
Systems > General Settings.
In the Northbound Interface tab, shown below, check the box to enable Northbound Portal Interface Support, then be sure to enter the same User Name and Password that you used for the administrator credentials of the SmartZone Controller. Click OK.
Note: You will need the these credentials when you perform corresponding configuration on your Cloudpath system.
Now, proceed to Configuring DPSK on Cloudpath to Integrate with SmartZone.
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_wireless_LANS_with_create_button=GUID-2778E9BF-BE29-4660-A5DF-0B56194AB725=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_create_wlan_config_whole_screen_with_sections_collapsed=GUID-794B6F46-2A51-4CC0-8A46-E36952D475F3=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_general_options=GUID-B4875A91-D491-4F98-8A22-AA5E469042F1=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_wlan_usage=GUID-CDB670CC-973B-419F-BC81-EFE38E0DD2D4=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_auth_options=GUID-C66C3940-759F-4E02-8EF1-1FFF1B6863FB=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_encryption_options_after_choosing_wpa2=GUID-71E6C9A1-BC09-4D93-A6EA-1D3D39ABB3C9=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_encryption_options=GUID-C65A17B9-26A4-45D4-B5F9-B5C151747880=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_accounting_server_portion_of_wlan_creation=GUID-B4ADDA3A-D86F-4082-B92A-5892BF8B76F4=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_options=GUID-0ADFDDE9-2CCD-4D49-B77F-9A0E19785293=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_radius_options=GUID-1554F8A1-F5D4-4F5E-B900-48F5CA94A3BD=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_wlan_config_complete_use_configure_tab_to_edit=GUID-A0F32949-65E0-4B11-B6DB-5EDDC379308D=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_getting_management_ip_address=GUID-B487B1E5-C5B9-470F-B4D3-BBB1A664EA2F=1=en-US=Low.png)
%20Configur_v1_GUID-D1777FB9-B673-49E0-B20F-969DA2AF9556/sz_northbound_int=GUID-4CFCED42-2685-4ADC-B73F-DDE31BE3640C=1=en-US=Low.png)