Verifying Readiness for Cloudpath to Join Active Directory Domain
After configuring an Active Directory (AD), there are steps to take to ensure that
the server is ready to be joined by the Cloudpath system.
Perform the following checks:
- On the Cloudpath UI, go to
Support > Diagnostics, click the
DNS Lookup tab, enter the fully qualified domain name (FQDN) of your AD server (such as msft-dc-2012.demo.sample.local)
in the Server DNS field, then click the
Run button. Check if the returned IP address is the IP address of the AD server:
- If the FQDN can be resolved, also verify that you can ping the FQDN under the Ping tab in the Support > Diagnostics portion of the UI. If the ping is not successful, check the network connectivity between the Cloudpath server and the resolved AD server IP address.
- If the FQDN cannot be resolved, ensure that there is an A record in the DNS server that Cloudpath points to. (You can verify the configured DNS server by logging into your Cloudpath system from the command line as cpn_service/<service password created during installation> and then running the show config command.)
- Test the Cloudpath connection to the AD Server:
- Go to the Configuration > Authentication Servers portion of the UI.
- Click the right-pointing green arrow to the right of the AD whose connection you are testing.
- On the ensuing "Test" popup window, enter the credentials for a user in that AD, then click Continue.
- You will receive a success or failure message, along with other pertinent information.